Walk-In Composite Salt Spray Test Chamber

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

1. Automotive Industry

Testing the corrosion resistance of complete vehicles, bodies, chassis, and new energy vehicle battery packs in coastal and frigid regions is a critical validation step for export model development.

2. Aerospace and Defense

Evaluating the reliability of aircraft components and military equipment under high salt fog and extreme temperature/humidity conditions ensures service life.

3. Large Structural Components

Simulating harsh environments like chemical plants and marine atmospheres to validate long-term corrosion resistance for items such as corrosion-resistant pipelines, photovoltaic modules, and ship components.

Standards

GMW 14872 Simulating the Corrosion Resistance of Automotive Components in Alternating Salt Spray, Humidity, and Dry Environments

GJB 150.11A Salt Spray Testing for Military Equipment

GB/T 10125-2021 Artificial Atmosphere Corrosion Testing—Salt Spray Test

ASTM B117 Simulating Complex Corrosion Environments (Marine, Chemical, etc.) to Evaluate Material or Coating Corrosion Resistance

ISO 9227:2022 Corrosion tests under artificial climatic conditions—Salt spray test

ASTM G85 Standard Test Method for Modified Salt Spray Test

GB/T 2423.17 Salt spray test for electrical and electronic products

GB/T 2423.18 Combined salt spray test

Features

1. Composite Environmental Simulation

Integrates multiple environmental stresses including salt spray (neutral NSS, acetic acid AASS, copper-accelerated CASS modes), temperature-humidity cycling (-40°C to 150°C, humidity 30% to 98% RH), and drying/condensation cycles. Simulates real-world corrosion scenarios such as marine atmospheres and industrial pollution zones.

2. Large-Scale Testing Capacity

Chamber dimensions typically range from 10–18m (L) × 3–5m (W) × 3–4m (H), accommodating large components like complete vehicles, body-in-white, and battery packs. Supports walk-through or lift platform designs for easy sample loading/unloading.

3. High-Precision Control and Intelligent Operation

Salt deposition is precisely controlled at 1–2 mL/80 cm²/h, with temperature fluctuations ≤±0.5°C and humidity deviation ≤±5% RH.

Equipped with a touchscreen programmable system supporting multi-mode cyclic testing (e.g., salt spray-damp heat-dry cycles), delivering high automation.

4. Corrosion-Resistant Structural Design

Interior walls utilize corrosion-resistant materials like PVC, FRP, or PP. Exterior shells are constructed from stainless steel or carbon steel with anti-corrosion coatings. Select models feature double-walled insulation to minimize heat loss.

Parameters

Item	Specifications	Features
Working Chamber Dimensions	10–18 m (L) × 3–5 m (W) × 3–4 m (H)	Customizable, suitable for whole vehicles or large components
Salt Spray Modes	Switchable between NSS/ASS/CASS modes	Meets different corrosion intensity requirements
Temperature Range	-40°C ~ 150°C (higher in some expanded models)	Supports combined temperature-humidity and salt spray tests
Salt Spray Settling Rate	1–2 mL/80 cm²/h, digitally displayed and automatically adjustable	Complies with GB/T 10125. ASTM B117. and other standards
Safety Protection	Over-temperature protection, water shortage alarm, leakage protection	Prevents sample damage

Test Procedures

1. Equipment Preparation

Verify chamber structural integrity and safety interlocks.

Check water supply, salt solution concentration, and salt spray generator operation.

Arrange samples securely on racks or lifting platforms.

2. Parameter Configuration

Select the desired salt spray mode (NSS/ASS/CASS).

Set temperature and humidity ranges, along with cycle duration.

Activate automated monitoring and data acquisition.

3. Test Execution

Start the chamber and monitor temperature, humidity, and salt spray deposition rates.

Perform cyclic testing according to programmed schedules.

Ensure safety alarms are active throughout the test.

4. Test Completion

Gradually return chamber to ambient conditions.

Remove samples carefully and analyze corrosion performance data.

Другие товары поставщика

	Glass Bottle Internal Pressure Resistance Tester | ISO 7458 Bottle Strength Test Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The internal pressure resistance tester for glass bottles is ma...
	Laboratory Electrospinning Device for Nanofiber Membrane Fabrication	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard T/YNIA 017-2023 "Electrospun Nonwoven Air Filter Materials" Techni...
	Catheter Leakage and Compliance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Leakage and Compliance Tester is a professional testing device used to evaluat...
	Strength Tester for Lead - end of Photovoltaic Modules	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Strength Tester for Lead-End of Photovoltaic Modules is designed to evaluate the mechan...
	EN 13501 Fabric Vertical combustion tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheVertical Flame Test Chamberis designed to measure the vertical flame sprea...

Все товары поставщика

Похожие товары

	Laser Cutting Machines	Продавец: Chanxan (Changshu) Laser Technology Co., Ltd.	Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ...
	Precision Laser Micromachining Machine	Продавец: Chanxan (Changshu) Laser Technology Co., Ltd.	Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ...
	Ultrafast Laser Systems	Продавец: Chanxan (Changshu) Laser Technology Co., Ltd.	Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi...
	Industrial Laser Equipment Manufacturer	Продавец: Chanxan (Changshu) Laser Technology Co., Ltd.	Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan...
	Common Rail Injector Valve F00R J02 012	Продавец: 868983	Common Rail Injector Valve F00R J02 012 David Chen