Customizable Full-Scale Fire Test Room Apparatus

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

This test apparatus conforms to a range of international and national standards:

GB/T 27904:2011 — Test method for flame spread of interior decoration materials

GB/T 25207:2010 — Classification of fire performance of building decorative materials

GB 8624:2012 — Classification of the burning behavior of building materials and products

ISO 9705:2016 — Full-scale room corner test for building materials

DS/ISO/TR 9705‑2 — Room corner fire test Part 2: Guidelines for material performance assessment

Parameters

Parameter	Specification
Combustion Chamber Size	2.4 m (L) × 3.6 m (H) × 2.4 m (W)
Smoke Hood Size	3 m (W) × 3 m (D) × 1 m (H)
Weight	700 kg
Sand-box Burner	Corner installation with 4–8 mm gravel and 2–3 mm sand, top surface flush with burner edge
Burner Ignition	Surface ignition (no electric spark)
Maximum Heat Output	300 kW
Mass Flow Controller Range	0–7 g/s, accuracy ≤1.5%
Smoke Sampling Flow	≥13 L/min (diaphragm pump)
Optical Measurement Range	400–750 nm, transmissivity accuracy 0.01%
Pressure Measurement	±200 Pa, sensor response ≤1 s
Oxygen Analysis	Paramagnetic, 16–21% (V/V), response ≤12 s
Carbon Dioxide Analysis	IR type, 0–10% CO2. linearity ≤1%, response ≤12 s
Data Recording Interval	3 s per record
Environmental Requirements	Power: 220V/10A, 380V/5KW; Temp: 10–35°C; Gas: propane, calibration gases: N2. CO2

Features

Complete system: Includes combustion chamber, smoke and sample gas collection, gas analysis and data processing, and fuel supply systems.

Precision smoke collection: Conical hood with mixing devices ensures uniform smoke sampling and accurate gas analysis.

High-capacity exhaust: Stainless steel centrifugal fan, temperature-resistant to 300°C, adjustable flow rate ≥3.5 m/s.

Accurate mass and gas flow measurement: Mass flow controllers for propane and air ensure precise heat output.

Advanced optical and gas analysis: Measures O2. CO2. smoke density, and visible light transmissivity with high accuracy.

Realistic fire simulation: Sand-box burner mimics corner fire conditions with adjustable heat output from 100 kW to 300 kW.

Safety protection: UV flame monitoring and automatic shutdown prevent system hazards.

Integrated data acquisition: Records temperature, pressure, smoke density, and gas concentration in real time; includes software for calibration, analysis, and report generation.

Accessories

Combustion chamber with corner sand-box burner

Smoke collection hood and stainless steel ducting with mixing devices

Gas analysis system (O2 and CO2 analyzers)

Data acquisition and processing system with computer and printer

Mass flow controllers and calibration gases (N2. CO2)

Optical measurement system and thermocouples

Pressure sensors and smoke density measurement system

Test Procedures

Install materials in the combustion chamber according to their real-life application layout.

Connect propane fuel and calibration gases, and ensure all sensors and measurement devices are operational.

Ignite the sand-box burner and control gas flow to produce 100 kW heat output for the first 10 minutes.

If no flashover occurs, increase heat output to 300 kW and continue for another 10 minutes.

Monitor flame spread, heat release rate, smoke production, and oxygen/CO2 levels in real time.

Stop the test immediately upon observing flashover or after the 20-minute test period.

Analyze and export results using the integrated software.

Maintenance Information

Inspect and clean the combustion chamber, sand-box burner, and exhaust ducts regularly.

Calibrate O2 and CO2 analyzers, optical systems, and mass flow controllers periodically.

Check thermocouples, pressure sensors, and smoke sampling systems before each test.

Ensure exhaust fans and ducting are free of obstructions and capable of continuous operation.

Store propane and calibration gases according to safety regulations, and maintain ambient temperature within 10–35°C.

Другие товары поставщика

	Building material burning tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical specifications TheBuilding material burning testeris designed and manufactured a...
	High Precision 4-Station Abrasion Resistance Test Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Nissan 4-Station Abrasion Tester is a high-efficiency laboratory instrume...
	95th Percentile Male Crash Test Dummy	Whats/App: +86 156 1874 6768 Web: standard-groups.com The 95th Percentile Male Crash Test Dummy is a biomechanical surrogate designed for frontal...
	Scott Flex Tester | Paper Folding Endurance Testing Machine Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Controlled Flexing Motion: Both ends of the sample are held in ...
	High temperature vacum friction & wear tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The working principle of a high-temperature vacuum friction and wear testing machine is to ...

Все товары поставщика

Похожие товары

	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...