Aviation Fuel Safety Testing Burner
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The NexGen Burner supports compliance with multiple international aviation and safety standards:
BSS 7303 – Aerospace composite material combustion and heat release testing.
BSS 7323 – Aerospace material smoke generation and toxicity evaluation.
BSS 7387 – Aerospace material flame spread and combustion behavior testing.
AITM 2.0056 – Cone calorimeter heat release rate measurement.
AITM 2.0010 – Smoke generation measurement for aerospace materials.
AITM 2.0009 – Flame spread performance measurement for aerospace materials.
FAR Part 25 Appendix F Part II – Cabin material combustion, flame spread, and smoke toxicity testing.
FAR Part 25 Appendix F Part III – Cabin material flame spread and smoke performance measurement.
FAR Part 25 Appendix F Part VII – Cabin material heat release and combustion performance testing.
ISO 2685:1998 – Fire resistance testing methods for aerospace materials.
Domestic Standards: MH/T 6086. HB 7263. MH/T 6041. GB/T 25352. HB 7044 – Various fuel combustion and burn-through testing methods.
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 20 mm (W) × 1150 mm (L) × 250 mm (D) |
| Weight | 10 kg |
| Flame Temperature | ≥ 2000 ± 50 ℉ |
| Flame Heat Flux | ≥ 10.6 W/cm² |
| Power Supply | 220 V, 5 A |
| Fuel Requirement | Aviation Grade 2 Fuel |
| Gas Requirement | Compressed air ≥ 120 psi |
Features
Burner cone made from corrosion-resistant, high-temperature alloy.
Complete assembly includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.
Temperature-controlled fuel and air baths (≥ 2 × 0.14 m³) maintain stable testing conditions.
Adjustable fuel nozzle and air pressure allow compliance with various test standards.
Insulation blankets cover fuel lines and burner body for safety and heat containment.
Capable of providing flame temperatures of at least 2000 ± 50 ℉.
Capable of providing flame heat flux of at least 10.6 W/cm².
Accessories
Fuel and air temperature control bath
Fuel solenoid valve and pressure gauge
Igniter assembly
Adjustable fuel nozzle
Insulation blankets and acoustic silencer
Mounting brackets and ventilation duct
Air regulator and temperature sensors
Test Procedures
Ensure installation space allows safe operation and access.
Connect the burner to 220 V, 5 A power supply.
Connect aviation-grade fuel and confirm compressed air supply ≥ 120 psi.
Mount the burner securely with insulation blankets applied to fuel lines and housing.
Adjust fuel nozzle and air pressure according to the selected test standard.
Activate the igniter to start the flame.
Monitor fuel flow, air pressure, flame temperature, and heat flux using gauges and sensors.
Conduct burn-through or flame spread tests on the sample material.
Record all test data for compliance reporting.
Shut off fuel and air supply, and allow the burner to cool before disassembly.
Maintenance Information
Regularly inspect burner cone, fuel nozzle, and igniter for corrosion or wear.
Verify fuel and air lines for leaks or blockages before each test.
Calibrate temperature and pressure sensors periodically.
Clean insulation blankets and acoustic components as required.
Replace worn or damaged safety devices immediately to maintain operational integrity.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High precision environmental simulation chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application HVAC and Indoor Airflow Research: Study indoor airflow patterns, temperature d... |
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester | Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness of dust in the production and processing places such as a... |
 |
Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This instrument is designed according to ISO11925-2. it is used to test build... |
 |
Sloped Impact Tester | Standard ASTM D7748: Impact resistance testing of packaging and transport systems. ISO 13355: Automotive component durability evaluation unde... |
 |
Leather thickness tester | Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f... |
Похожие товары
 |
ISO 29463 HEPA/ULPA filter performance testing System | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports and compli... |
 |
High-Precision ISO 16890 Filter Media Test Rig for R&D and QC | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and com... |
 |
Mobile Floor Scrubber Aging Life Tester IEC 60312 | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMobile Floor Scrubber Aging L... |
 |
ISO 12103 Cleanable Filter Media Test System | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1)... |
 |
Robotic Vacuum Cleaners Edge-Following Tester | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheEdge-Following Test Equipment... |
