ASTM E662 smoke density tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The instrument conforms to the following national and international standards:

(1) GB/T 8323.2-2008 – Plastics – Smoke generation – Part 2: Determination of smoke density using the single-chamber method

(2) ISO 5659.2-2006 – Plastics – Smoke generation – Part 2: Determination of optical density

(3) ASTM E662-2014 – Standard test method for specific optical density of smoke generated by solid materials

(4) BS 6853:1999 – Railway applications – Smoke generation from passenger carriage materials

(5) NFPA 262 – Standard test method for flame and smoke spread

(6) UL 94 – Standard for flammability of plastic materials

(7) ISO 1210 – Determination of thermal stability and flammability of plastics

Parameters

Parameter	Specification
Measurement range	0.0001–100% smoke density; 0–924 (six automatic ranges)
Operating voltage	200–240 V, 50 Hz
Environmental conditions	Room temperature – 40°C, relative humidity ≤85%
Heat flux	50 kW/m²
Light source	6.5 V incandescent lamp, wavelength 400–750 nm
Detector	Silicon photodiode, 0–100% transmittance, 0.001% precision
Fuel type	Propane ≥95% purity
Burner	Igniter and nozzle combination, 10 mm from sample
Smoke measurement system	Digital display of optical density
Chamber design	Fully open doors for easy loading, cleaning, and side-mounted controller
Gas sampling port	Optional, for toxicity testing
Chamber coating	Chemically resistant and easy to clean

Features

(1) High-precision smoke measurement: Advanced photodetector and silicon cell ensure accurate optical density readings.

(2) Automated testing: Minimizes manual intervention, improving efficiency and data reliability.

(3) Standards compatibility: Supports GB, ISO, ASTM, and other international standards.

(4) Versatile applications: Suitable for plastics, construction, automotive, aerospace, and safety testing.

(5) Safety design: Equipped with automatic shut-off to ensure operational safety.

(6) Modular configuration: Optional gas measurement ports and printer for expanded functionality.

(7) Durable and stable: High-quality materials and corrosion-resistant coating ensure long-term reliability.

Accessories

(1) Propane cylinder (≥95% purity, user-supplied)

(2) Smoke sampling tube (1 set)

(3) Silicon photodiode (1)

(4) Light source lamp, 6.5 V (1)

(5) Filter set (1)

(6) Protective door (1)

Test Principles

The F313 Plastic Smoke Density Tester measures smoke optical density by placing a burning plastic sample in a controlled environment. A light source passes through the smoke, and a silicon photodiode detects the transmitted light. The system calculates the specific optical density of the smoke. Maximum optical density is measured to evaluate the smoke-generating characteristics of the plastic material. All measurements strictly comply with GB, ISO, and ASTM standards.

Operation Instructions

Sample preparation: Ensure test samples meet dimensional requirements (100 × 100 mm, thickness ≤50 mm).

Device setup: Connect power and set appropriate parameters, including temperature and gas flow.

Start test: Press the “Start Test” button; the system automatically ignites the sample and collects data.

Safety precautions: Operators should wear protective equipment and ensure adequate ventilation.

Test completion: Data is automatically displayed and can be printed. Clean the chamber to remove residual smoke before turning off the device.

Другие товары поставщика

	Solid Auto - ignition Point Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com This tester determines the self - ignition characteristics of solid chemical products by pl...
	ISO 16890 Air Filter Test System for Gas Turbine Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Principle A defined volume flow rate is suc...
	So2 H2s CO2 HCl Artificial Climate Chamber	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSO₂ H₂S HCl Corrosion Test Equipmentis designed to simulate corrosive envi...
	High Precision Car Seat Comfort Testing System for Ergonomic & Dynamic Performance Evaluation	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Simulates vertical and horizontal dynamic loads on automotive seats...
	High Precision Automotive Camera Leak Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60529 (IP Code protection classification) (2) ISO 20653 (...

Все товары поставщика

Похожие товары

	ER4047 Aluminum Mig Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Продавец: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...