Reciprocating Friction and Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The machine operates by applying a specified normal contact load while the specimen performs a linear reciprocating motion over a set stroke length. It features a stepless speed adjustment system, allowing testing at low or high speeds. The tester evaluates the friction and wear performance of lubricants, metals, plastics, coatings, rubber, ceramics, and other materials. Typical test configurations include pin-on-disk, ball-on-disk, and similar forms.
The tester consists of the main frame, axial loading module, linear reciprocating module, specimen fixtures, heating device, and measurement system. The loading system employs precision ball screws, linear ball bearings, and a loading shaft, resulting in low friction and minimal influence on test force accuracy. A load sensor is installed between the loading shaft and piston, providing high sensitivity and accurate test force measurement. The test force is precisely controlled by a high-accuracy servo motor, offering fast response, high control precision, and minimal impact on test results.
The measurement and control software is Windows-based and supports XP, Win7. Win8. and Win10 systems. Test force application is controlled via a servo system, ensuring stable and reliable force. All test parameters—including spindle speed, rotation count, applied force, friction force, friction component temperature, and test duration—are computer-controlled. Real-time data acquisition enables plotting of friction force vs. time, friction coefficient vs. time, and temperature vs. time curves.
Applications
Material Performance Evaluation: Measure friction and wear behavior of metals, polymers, composites, and coatings.
Lubricant Testing: Assess effectiveness of oils, greases, and solid lubricants under reciprocating motion.
Surface Coating and Treatment Analysis: Evaluate durability and adhesion of coatings, films, and surface-hardened layers.
Component Simulation: Test mechanical parts like pistons, seals, bearings, and sliding elements under realistic reciprocating conditions.
Research and Development: Support tribology studies, material optimization, and wear mechanism analysis.
Quality Control: Ensure consistent material and component performance during production.
Extreme Condition Testing: Examine behavior under varying load, speed, temperature, and environmental conditions.
Features
Reciprocating Motion Control: Simulates real-life sliding and reciprocating conditions accurately.
Adjustable Load: Can apply a wide range of normal forces for diverse material tests.
Variable Speed: Supports low to high reciprocating speeds to replicate different operating conditions.
Temperature Control: Optional heating or cooling to test materials under extreme conditions.
Lubrication Capability: Can test under dry or lubricated conditions.
High-Precision Sensors: Real-time measurement of friction force, wear, and displacement.
Automated Data Acquisition: Collects and records friction coefficient, wear rate, and other parameters.
User-Friendly Software: Configures test parameters, monitors progress, and generates reports.
Modular Design: Easy to install, replace, or upgrade test modules and accessories.
Compliance with Standards: Supports international testing standards like ASTM, ISO, and GB/T.
Compact and Stable Structure: Minimizes vibration for accurate and repeatable results.
Versatile Material Compatibility: Suitable for metals, polymers, composites, and coatings.
Technical Specifications
| No. | Parameter | Specification |
|---|---|---|
| 1 | Test Force Range | 0–2000 N |
| 2 | Test Force Working Range (Stepless) | 0.5%–100% |
| 3 | Test Force Relative Error | ≤ ±1% |
| 4 | Test Force Accuracy | ±0.05 N |
| 5 | Automatic Load Rate | 1–200 N/s |
| 6 | Long-term Test Force Error | ≤ ±1% |
| 7 | Friction Force Measurement Range | 0–500 N |
| 8 | Friction Force Relative Error | ±1% |
| 9 | Friction Force Resolution | 0.01 N |
| 10 | Specimen Size Range | 0–70 mm (circular or square) |
| 11 | Friction Type | Linear reciprocating |
| 12 | Reciprocating Stroke | 0–30 mm |
| 13 | Reciprocating Frequency | 0–10 Hz |
| 14 | Electric Furnace Heating Temperature | Room temperature – 1200 ℃ |
| 15 | Temperature Control Accuracy | ±2 ℃ |
| 16 | Pin Specimen Diameter | 4–8 mm |
| 17 | Maximum Distance Between Spindle and Lower Disk | ≥ 70 mm |
| 18 | Spindle Control | Time control, rotation control, automatic load maintenance; real-time display of parameters, record test curves, and output reports |
| 19 | Test Duration Display & Control | 0 s – 9999 min |
| 20 | Test Rotation Count & Control | 0 – 999.999 r |
| 21 | Spindle Motor Rated Power | 2 kW |
| 22 | Specimen Fixtures | Pin-disk, ball-disk, thrust ring, or customized |
| 23 | Machine Dimensions | Approx. 1100 × 650 × 1600 mm |
| 24 | Machine Weight | Approx. 300 kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Accelerated oxidation tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Differential Scanning Calorimeter DSC is designed to determine the inner heat transition re... |
 |
JIS Rubbing Color Fastness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubbing Color Fastness Tester is a Type II rubbing test machine designed and manufactur... |
 |
Catheter Residual Vacuum Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The catheter residual vacuum tester is mainly used to determine the physical ... |
 |
Gloss Meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interio... |
 |
Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to eva... |
Похожие товары
 |
ER4047 Aluminum Mig Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Продавец: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
