Drying Rate Tester Heated Plate Method
Get a quote:
Whats/App: +86 181 0160 0864
The Hot Plate Method Fabric Drying Rate Tester is an advanced, automated instrument specifically engineered to determine the drying kinetics of textiles. Designed in strict accordance with the AATCC 201 standard, this device simulates the evaporation of moisture from a fabric surface as it contact-heats against a controlled thermal plate. By integrating high-precision infrared sensors and calibrated airflow systems, you can accurately quantify the drying time and drying rate of high-performance fabrics. This tester provides a critical benchmark for evaluating "moisture-wicking" and "quick-dry" claims, ensuring that functional garments meet the physiological comfort requirements of the end-user.
Applications
The Hot Plate Method Fabric Drying Rate Tester is an automated testing instrument designed to measure the drying rate of textiles in accordance with the requirements of the American Association of Textile Chemists and Colorists (AATCC) Test Method 201.
Standards
AATCC 201-2013 Fabric Drying Rate: Hot Plate Method
FZ/T 01176-2024 Textiles - Determination of Fabric Drying Rate - Hot Plate Method
Features
1. Incorporates high-precision wind speed sensors, infrared temperature sensors, temperature sensors, precision dripping devices, high-accuracy wind speed control units, and fluid dynamics-optimized air ducts.
2. Integrates with computer software to automatically perform fabric drying time and drying rate tests along with comprehensive data analysis, significantly enhancing operational efficiency and measurement accuracy while minimizing human-induced errors.
3. Test software communicates with the main unit via USB port, displaying and saving data as curves and charts for easy analysis and printing. Wide adjustable ranges for wind speed (0.2–4.5 m/sec) and drip volume (0.05–4.5 ml).
4. The hot plate method not only complies with the AATCC 201 testing standard but is also suitable for knitted fabrics or any quick-drying fabrics (excluding fabrics used in socks).
Parameters
| Item | Specifications |
|---|---|
| Air Chamber | Capable of generating 0.2–3 m/sec airflow |
| Heating Plate | 300mm×300mm±1mm |
| Flexible Heating Sheet | 300mm×300mm±1mm |
| Insulation Soft Board | 300mm×300mm±1mm |
| Heating Plate Temperature | 37±0.5°C (with overheat protection) |
| Air Velocity | 0–2.5 m/s±0.1 m/s |
| Infrared Temperature Sensor | 15–50°C±0.1°C |
| Data Transmission | USB data transmission |
| Test Interface | Curves and charts displayed simultaneously |
| Test Report | Automatically saved, easy to print |
| Power Supply | AC 230V, 50Hz/60Hz |
| Overall Dimensions (L×W×H) | 450×320×170 mm |
| Weight | Approximately 45 kg |
Accessories
Standard Configuration:
Temperature recorder, infrared thermocouple probe, fan box, metal plate, cork insulation, micropipette, anemometer, magnetic, plastic or metal strip
Configuration Options:
1. Drying rate tester main unit + software
2. Drying rate tester software
3. Dedicated computer
4. Sample clamping rod
5. USB data cable
Test Procedures
Preparation:Connect the instrument to the power supply. Ensure airflow, heating plate, and infrared sensors are calibrated.
Sample Placement:Position the fabric sample on the heating plate. Ensure consistent contact and sample alignment.
Parameter Configuration:Set target temperature, airflow velocity, and drip volume via the software interface.
Test Initiation:Start the automated test sequence. The system will apply controlled heat and airflow, recording moisture evaporation and drying rate in real-time.
Data Collection:Curves and charts are generated automatically. Save or export results for analysis or reporting.
Completion:Remove the sample after test completion. Power off the device or prepare for the next measurement.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermal Conductivity Tester(Transient Fast Hot-Wire Method) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Transient Fast Hot-Wire Thermal Conductivity Tester is a compact and efficient ins... |
 |
Helmet Xenon Aging Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Helmet Fixed-Point Protection Area Testing Equipment is a specialized device u... |
 |
Syringe Sealing Negative Pressure Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Syringe Sealing Negative Pressure Tester is a precision instrument designed to... |
 |
Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer | Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres... |
 |
Automated Clutch Friction Test Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Automated Clutch Friction Test Machine is a laboratory test system designed to... |
Похожие товары
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Продавец: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Продавец: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
