Wire-to-Wire Vibration Abrasion Tester
Get a quote：
Whats/App: +86 181 0160 0864
The Wire-to-Wire Vibration Abrasion Tester is designed to evaluate the abrasion resistance of automotive wires with cross-sectional areas below 6 mm² under controlled vibration conditions. The instrument tests the insulation surface of wires under repetitive contact, providing an accurate assessment of automotive wire durability and wear performance.
Application
(1) Automotive wiring harness manufacturers – assess wire insulation abrasion resistance.
(2) Electrical component quality control – verify compliance with wire wear standards.
(3) Research and development – test new wire insulation materials.
(4) Automotive electronics testing labs – evaluate vibration-induced wear on wiring systems.
(5) Certification bodies – perform standardized abrasion testing of low-voltage wires.
Standards
(1) VW60306:2000-11 – Automotive wire abrasion testing standard
(2) GS95007-1:2007-08 – Wire insulation wear test requirements
Parameters
| Parameter | Specification |
|---|---|
| Vibration Frequency | 10 Hz |
| Vibration Amplitude | 6.35 ± 0.25 mm |
| Vibration Direction | Horizontal |
| Fixed Wire Support Distance | 280 mm |
| Movable Wire Support | One point on fixed platform, other passes through guide >14× wire diameter |
| Distance Between Vibration and Fixed Table | 45 mm |
| Friction Point | Midpoint of sample (10% position) |
| Applied Mass | 10 N, 12.5 N, 15 N, 20 N |
| Abrasion Count Setting | 1–9999 cycles adjustable |
| Automatic Stop | When wire insulation is breached and conduction occurs |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Safety Helmet Impact and Penetration Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Acceleration Impact and Penetration Tester is a specialized test... |
 |
Full-Body Garment Stress Tester | Get a quote: Whats/App: +86 181 0160 0864 TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exerted b... |
 |
Pumpability tester EN 12723 ISO 5198 | Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
 |
Luggage lifting and unloading testing machine | Product Introduction: The luggage simulation lifting and unloading tester is a measuring instrument for the life of the handle of the luggage carr... |
 |
Gravel Resistant Impact Tester/Stone chip tester | Get a quote： Whats/App: +86 181 0160 0864 The Gravel Resistant Impact Tester/Stone Chip Tester T201 is specifically designed for gravel impact te... |
