RE Type Side Impact Crash Dummy Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Male Side Impact Dummy (RE Type) is a high-fidelity side impact test dummy designed based on 50th percentile adult male anthropometric data. It is used to simulate biomechanical responses of occupants during vehicle side collisions, accurately representing chest, pelvis, and lower limb acceleration, load, and displacement. The dummy features an enhanced rib structure with a rib extension mechanism, enabling realistic interaction with seats and door panels. It is suitable for regulatory testing, NCAP evaluation, and vehicle passive safety development.
Standards
(1) GB/T 11551 – Protection of occupants in frontal and side collisions
(2) GB 14166 – Motor vehicle seat belts and restraint systems
(3) FMVSS 214 – Side impact protection
(4) UNECE R95 – Lateral collision protection
(5) UNECE R135 – Pole side impact
(6) SAE J1727 – Side impact dummy performance specification
(7) ISO 15830 – Road vehicles – Side impact dummy – Calibration
(8) Euro NCAP – Side impact test protocol
Parameters
Dimensional Data
| No. | Item | Dimension (mm) |
|---|---|---|
| 1 | Sitting height | 909 ±9 |
| 2 | Seat to shoulder | 565 ±7 |
| 3 | Seat to bottom of thorax box | 351 ±5 |
| 4 | Seat to hip joint (bolt center) | 100 ±3 |
| 5 | Foot to seat height (sitting) | 442 ±9 |
| 6 | Head width | 155 ±3 |
| 7 | Shoulder breadth | 470 ±9 |
| 8 | Chest width | 327 ±5 |
| 9 | Abdomen width | 280 ±7 |
| 10 | Pelvis width | 366 ±7 |
| 11 | Head depth | 201 ±5 |
| 12 | Chest depth | 267 ±5 |
| 13 | Abdomen depth | 199 ±5 |
| 14 | Pelvis depth | 240 ±5 |
| 15 | Rear pelvis to hip joint (bolt center) | 155 ±5 |
| 16 | Rear pelvis to front knee | 606 ±9 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head | 4 ±0.05 |
| Neck | 1 ±0.05 |
| Thorax | 22.4 ±1 |
| Left arm | 1.3 ±0.1 |
| Right arm | 1.3 ±0.1 |
| Abdomen | 5 ±0.25 |
| Pelvis | 12 ±0.6 |
| Left leg | 12.7 ±0.6 |
| Right leg | 12.7 ±0.6 |
| Total | 72.4 ±1.2 |
Sensor Configuration
| Location | Sensor Type | Channels |
|---|---|---|
| Head | Accelerometer | 3×1 |
| Head | Gyroscope | 3×1 |
| Upper Neck | 6-channel load cell | 1×6 |
| Lower Neck | 6-channel load cell | 1×6 |
| Shoulder | 3-channel load cell | 1×3 |
| Thorax | Tilt sensor | 1×2 |
| Torso | 4-channel load cell | 1×4 |
| Thoracic T1 | Accelerometer | 1×3 |
| Thoracic T12 | Accelerometer | 3×1 |
| Ribs | Accelerometer | 3×1 |
| Ribs | Linear potentiometer | 3×1 |
| Thoracic T12 | 4-channel load cell | 1×4 |
| Abdomen | Single-channel load cell | 3×1 |
| Lower lumbar | 3-channel load cell | 1×3 |
| Pelvis | Tilt sensor | 1×2 |
| Pubis | Single-channel load cell | 1×1 |
| Sacrum | Accelerometer | 3×1 |
| Thigh | 6-channel load cell | 1×6 |
Features
(1) Designed based on 50th percentile adult male anthropometry for high biofidelity;
(2) Enhanced rib structure with rib extension mechanism for realistic chest lateral compression and displacement;
(3) Accurate interaction with seats and door panels;
(4) Supports multi-channel force, acceleration, and displacement measurement;
(5) Stable structure suitable for regulatory and high-repetition tests;
(6) Compatible with multiple international side impact regulations and NCAP protocols.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Laboratory Particle Strength Measurement Machine ISO Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ASTM D4179 — Standard Test Method for Single-Pellet Pres... |
 |
Flame spread index testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in the following scenarios: Building materials eval... |
 |
Pipe coating scratch tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pipe Coating Scratch Tester, also known as a paint and varnish scratch resistance teste... |
 |
Battery Cell Test Pressure Vessel，battery safety testing pressure chamber\ | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Cell Test Pressure Vessel is designed for thermal runaway testing of battery ce... |
 |
Thermal Conductivity Measurement System for PCB Ceramic Substrates and Silicone Insulation Materials | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with: MIL-I-49456A – Insulating She... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
