Ball-on-Disc Tribology Testing Machine Supplier China
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Pin-on-Disc Machine is a classic tribological testing instrument designed for studying friction, wear, and contact behavior of materials under controlled sliding conditions. You can use a pin or ball sample loaded vertically against a rotating horizontal disc to simulate real-world sliding contacts. The instrument features a pneumatic loading system that minimizes inertia effects on friction and wear response, making it suitable for dry, lubricated, and extended contact-type testing.
Standards
You can perform tests according to these procedures:
(1) ASTM G99 – Pin-on-Disc wear testing method.
(2) ASTM F732 – Reciprocating pin-on-plate friction test method.
(3) DIN 50324 – Methods for testing friction and wear.
(4) ISO/DIS 7148-2 – Guidelines for pin-on-disc friction and wear testing.
Parameters
| Parameter | Specification |
|---|---|
| Rotational Speed | 20 – 2.000 rpm |
| Equivalent Sliding Velocity | 0.05 – 8 m/s |
| Test Track Radius | 0 – 35 mm |
| Load Method | Pneumatic / Weight loading |
| Pneumatic Load Range | 25 – 1.000 N |
| Weight Load Range | 5 – 100 N |
| Cyclic Load Amplitude | Up to 50% of set load |
| Cyclic Load Form | Sine / Triangle |
| Cyclic Load Frequency | Max 1 Hz |
| Friction Force Measurement | 0 – 50 N / 0 – 1.000 N |
| Wear Measurement | LVDT displacement sensor |
| Wear Measurement Range | 0 – 2.5 mm |
| Wear Resolution | <1 µm |
| Contact Potential | 40 mV DC |
| Temperature Measurement | K-type thermocouple |
| Disc Sample | Ø75 mm × 8 mm |
| Pin Sample | Ø8 mm × 35–68 mm |
| Ball Sample | Ø6 mm |
| Drive Motor | 2.2 kW AC vector motor |
| Control & Data Acquisition | Software + USB interface |
Features
(1) Pneumatic loading reduces inertia influence on friction and wear results.
(2) Rigid pin and disc support structure simulates near-flat contact conditions.
(3) Vector-controlled AC motor ensures stable rotation and wide speed range.
(4) Low rotational inertia pin holder enables high-bandwidth friction signal measurement.
(5) Supports constant and periodic cyclic load tests.
(6) Contact potential measurement allows friction state analysis.
(7) Modular design allows multiple sliding and contact configurations.
(8) Supports both rotary and reciprocating motion modes.
Accessories
(1) Standard Ø8 mm pin sample holder.
(2) Standard Ø6 mm ball sample fixture.
(3) Pneumatic loading assembly with load sensor.
(4) Contact potential measurement assembly with slip ring.
(5) Optional LE lubrication test chamber ≤200°C.
(6) Optional HT hot air heating system ≤400°C for dry friction.
(7) Optional R reciprocating adapter, stroke 0–50 mm.
(8) Optional LCA line contact adapter for piston ring–cylinder liner tests.
(9) Optional PV Pin-V / Block-Ring adapter for high-load tests.
(10) CAL calibration kit for load and friction.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Comprehensive Engine Oil Filter Performance Test Bench | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This test bench is designed for comprehensive evaluation of engine oil filters... |
 |
Haptic Skill Logger，advanced tactile detection sensor | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Haptic Skill Logger is a measurement and recording system designed to quantitatively ca... |
 |
Simulation Test Dummy | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can utilize this Simulation Test Dummy across various defense and industr... |
 |
Coatings Shear Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings... |
 |
High Temperature Creep Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The High Temperature Creep Test Machine is designed for evaluating the long-term creep, end... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
