Advanced Gas Jet Erosion Rig for Surface Durability Testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Gas Jet Erosion Rig is a laboratory testing system designed to evaluate erosion wear behavior of materials and coatings subjected to high-velocity particle-laden gas flow. You use this equipment to simulate solid particle impact erosion under controlled conditions by adjusting particle velocity, mass flow rate, impingement angle, and specimen orientation. It is suitable for standardized testing and comparative analysis of metals, ceramics, polymers, and coated surfaces.
Standards
You can conduct erosion tests in accordance with the following international standards:
(1) ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
(2) DIN 50332 – Erosion Testing by Particle Jet Method
(3) ISO 20567-1 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 1
(4) ISO 20567-2 – Paints and Varnishes – Determination of Stone-Chip Resistance – Part 2
Parameters
| Parameter | Specification |
|---|---|
| Particle Nozzle | Inner diameter 4.7 mm, length 300 mm, stainless steel |
| Nozzle Height Adjustment | Adjustable nozzle-to-specimen distance |
| Specimen Holder | Tiltable, specimen size 50 × 50 mm |
| Particle Velocity (Standard Mode) | 25 – 80 m/s at 1.5 bar |
| Particle Velocity (Enhanced Mode) | Up to 120 m/s at 4 bar |
| Particle Mass Flow Rate | 0.2 – 2 g/min |
| Gas Heating | Optional, up to 100°C |
| Power Supply | 220/240 V, single phase, 50 Hz, 1.5 kW |
| Compressed Air (Standard Mode) | 1.5 bar, 3.5 cfm |
| Compressed Air (Enhanced Mode) | 4 bar |
| Installation Dimensions | 1000 × 1200 × 400 mm |
| Installation Type | Floor-standing |
Features
(1) Large-diameter nozzle design reduces localized drilling effects and is suitable for coating and bulk material testing.
(2) Low operating pressure improves operational safety and reduces system wear.
(3) Adjustable nozzle position and tiltable specimen holder allow precise control of impact angle.
(4) Stable particle mass flow control using a grooved rotating disc combined with Venturi feeding.
(5) Suitable for a wide range of test materials and particle types.
(6) Modular construction enables quick replacement of nozzle, specimen holder, and heating unit.
(7) Optional gas heating supports erosion testing under elevated temperature conditions.
(8) Robust enclosure improves operator safety and test repeatability.
Accessories
(1) Adjustable stainless steel nozzle assembly
(2) Tiltable specimen clamping fixture for 50 × 50 mm specimens
(3) Particle feeding system with grooved disc and Venturi injector
(4) Abrasive particles selected according to test requirements
(5) Optional gas flow heating unit
(6) Compressed air connection components
(7) Safety enclosure for particle containment
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Alternative to Thrust Bearing Rolling Friction and Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Thrust Bearing Rolling Friction and Wear Testing Machine is a laboratory device designe... |
 |
OEM Walk-in Climate Test Chamber Factory Direct | Temperature & Humidity Simulation Solutions | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 2423.1: Environmental testing methods for electrical and elec... |
 |
Textile Thermal Insulation Property Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Thermal Insulation Property Tester is designed to evaluate the thermal insulati... |
 |
ASTM F2100 mask tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Automatic Filter Performance Tester is used fortestingprofessional filter... |
 |
Accurate artificial turf wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 20394-2013: Sports Artificial Turf (China) BS EN 13672:2004: Determination... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
