ISO 7628 High Precision Rolling Bearing Tribometer Manufacturer
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Rolling Bearing Tribometer is a laboratory test system used to measure friction losses, temperature rise, and dynamic behavior of rolling element bearings under controlled load and speed conditions. The system is suitable for testing a wide range of rolling bearings, including axial-load and heavy-duty taper roller bearings. Two interchangeable test assemblies allow operation under low-load and high-load conditions, enabling accurate friction and durability evaluation across different bearing sizes and load classes.
Standards
The system is applicable to testing and evaluation in accordance with the following standards and guidelines:
(1) GB/T 307.1 — Rolling Bearings — Dynamic Performance Test Methods
(2) GB/T 307.2 — Rolling Bearings — Friction and Endurance Test Methods
(3) ISO 15243 — Rolling Bearings — Damage and Failure Terminology
(4) ASTM D7048 — Standard Test Method for Measurement of Bearing Friction and Lubrication Performance
(5) DIN 51819 — Lubrication and Fatigue Testing of Rolling Bearings
(6) ISO 281 — Rolling Bearings — Dynamic Load Ratings and Rating Life
(7) — Measurement of Mechanical Vibration
Parameters
| Item | Low Load Assembly | High Load Assembly |
|---|---|---|
| Load range | 200 – 10.000 N | 2.000 – 40.000 N |
| Load actuation | Servo-controlled pneumatic bellows | Servo-controlled pneumatic bellows |
| Load feedback | Force transducer | Force transducer |
| Friction torque measurement | In-line torque transducer (10 Nm) | Torque arm with load cell |
| Maximum bearing outer diameter | 60 mm | 180 mm |
| Speed range | 100 – 7.500 rpm | 100 – 7.500 rpm |
| Heating power | 550 W | 550 W |
| Maximum test temperature | 150 °C | 150 °C |
| Temperature sensor | Type K thermocouple | Type K thermocouple |
| Vibration sensor | Piezoelectric, adjustable sensitivity | Piezoelectric, adjustable sensitivity |
| Load reaction path | Main shaft bearing | Bearing housing |
| Control interface | Serial communication | Serial communication |
| Software interface | PC-based control and data acquisition | PC-based control and data acquisition |
| Drive motor | AC motor, 4 kW @ 1.500 rpm | AC motor, 4 kW @ 1.500 rpm |
| Power supply | 3-phase industrial supply | 3-phase industrial supply |
Features
(1) Dual load configuration supporting both low-load and high-load bearing tests
(2) High-speed capability up to 7.500 rpm for dynamic friction evaluation
(3) Accurate friction torque measurement using direct torque sensing or torque arm methods
(4) Independent load reaction design to protect the main drive shaft under high loads
(5) Integrated temperature and vibration monitoring for comprehensive bearing condition analysis
(6) Compatibility with circulating lubrication systems for oil temperature control and cooling
(7) Flexible bearing fixture design allowing testing of different bearing types and sizes
Accessories
(1) Low-load bearing test assembly with self-aligning lubricant reservoir
(2) High-load bearing test assembly with reinforced bearing housing
(3) Pneumatic load actuation system with force feedback
(4) Lubrication circulation module with heating and cooling capability
(5) Bearing mounting fixtures for different bearing geometries
(6) Temperature and vibration sensors
(7) PC-based control and data acquisition software
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
UV Accelerated Weathering Chamber Manufacturer（ASTM Standard） | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Ultraviolet Aging Test Chamber is a laboratory testing system specifically de... |
 |
Ring-on-Block Friction and Wear Test Equipment Model 2M | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties GB/T 3... |
 |
Best Guide Wire Tip Softness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards FDA-16007 FDA Guidance: Coronary, Peripheral, and Neurovascular Guidewires &ndas... |
 |
Solids Spontaneously Igniting Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests an... |
 |
Carpet tuft length measuring instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard BS 4223:1989 (British Standard): Specifies methods for determining the pile len... |
Похожие товары
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
