Laboratory Transient Plane Heat Source Thermal Conductivity Analyzer for Geotechnical Testing
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ISO 22007-2:2008 – Determination of Thermal Conductivity and Thermal Diffusivity of Solids by Transient Plane Source (TPS) Technique
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.001–100 W/(m·K) |
| Measurement time | 1–60 seconds |
| Accuracy | Better than 3% |
| Temperature range | Standard: room temperature; optional: -20–120°C (additional cost) |
| Sample dimensions | Height ≥10 mm; diameter ≥45 mm; relatively flat surface required |
| Sample type | Solid geotechnical specimens, soil cores, rock slices |
| Operation | Fully automated via software |
| Power supply | AC 220V, 50/60 Hz; total power <500 W |
| Reference standard | ISO 22007-2:2008 |
Features
Rapid testing: Complete measurement in 1–60 seconds.
Minimal sample preparation: Solid specimens only need a flat surface.
Avoids contact resistance errors: Ensures accurate results for geotechnical materials.
Automated operation: Software-controlled measurement, data analysis, and report output.
Special sample holder: Circular holder designed for soil and rock specimens.
Broad applicability: Can test a wide range of geotechnical samples under varying temperature conditions.
Accessories
Main instrument
Analysis software (Chinese & English version)
Hot Disk probe
Geotechnical circular sample holder
Power cable and basic user manual
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Helmets Designated Protection Areas Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet designated protection area testing device is a piece of equipment used to mark t... |
 |
Catheter bending resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Bending Resistance Tester is a specialized instrument designed to evaluate the... |
 |
Fabric puncture damage analysis instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile... |
 |
Goggles Puncture Resistance Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain ... |
 |
Airbag-type contact pressure tester supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You use this tester to measure contact pressure in: Functional garments such ... |
