Thermal Conductivity Tester for Silicone and Ceramic Substrates
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Thermal Conductivity Tester for Silicone and Ceramic Substrates is a high-precision instrument designed to measure thermal resistance, thermal conductivity, and interface contact thermal resistance of thin heat conductors, solid electrical insulation materials, thermal grease, resins, rubber, beryllium oxide ceramics, and aluminum oxide ceramics. The instrument can test solid sheet materials directly, and with the use of a sample frame, it can measure powdered and paste materials.
Designed and manufactured in full compliance with ASTM D5470-2017 standards, tester incorporates over a decade of production experience and user feedback to provide mature and reliable performance. The instrument features servo-controlled precise automatic pressing, automatic thickness measurement, 6-point temperature gradient detection, and computer-controlled fully automatic operation. Built-in thermal protection around the test rod reduces environmental influence, enabling precise measurement of materials under varying pressures. This tester also includes automatic cold-end temperature compensation, eliminating the need for ice-water compensation.
Users can select standard or compact models according to laboratory space constraints without compromising performance. The instrument is widely applied in universities, research institutes, quality inspection laboratories, and industrial production plants.
Application
This tester is suitable for testing:
Thin heat conductors and metals
Solid electrical insulation materials
Thermal greases and thermal silicone pads
Resins, rubber, and engineering plastics
Beryllium oxide ceramics and aluminum oxide ceramics
Aluminum substrates, copper-clad laminates, and composite ceramics
Foam copper, graphite sheets, and other novel thermal interface materials
Typical applications include:
Academic research: Thermal property analysis of materials
Industrial quality control: Verifying thermal performance of production materials
R&D labs: Testing thermal interface materials (TIMs) and adhesives
Production sites: Evaluating aging, reliability, and compression performance of materials
Standards
The instrument complies with:
MIL-I-49456A – Insulating Sheet Materials, Thermally Conductive Resins, Glass-Fiber Reinforced Thermal Materials
GB 5598-2015 – Method for Determining Thermal Conductivity of Beryllium Oxide Ceramics
ASTM D5470-2017 – Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
GB/T 29313-2012 – Test Methods for Thermal Conductivity of Electrical Insulation Materials
Parameters
| Item | Specification |
|---|---|
| Sample size | Φ30 mm or 20×20 mm (standard); custom sizes available |
| Sample thickness | 0.001–50 mm; typical 0.02–20 mm |
| Hot plate temperature range | Room temperature–100 °C (standard); optional 300 °C or 500 °C |
| Cold plate temperature range | 0–99 °C; precision 0.01 °C (with high-precision low-temperature water bath) |
| Thermal conductivity range | 0.01–50 W/m·K; 0.1–300 W/m·K, software auto-switching |
| Thermal resistance range | 0.05–0.000005 m²·K/W |
| Pressure range | 0–1000 N; servo-controlled; precision 1 N |
| Thickness measurement range | 0–50 mm; resolution 0.1 μm; automatic |
| Sample quantity | 1 piece (thin film, multiple layers) |
| Measurement accuracy | Better than 3% |
| Test modes | Thermal resistance under varying pressures; material thermal conductivity; contact thermal resistance; aging reliability; compression performance; inter-sample contact thermal resistance |
| Automation | Computer-controlled fully automatic measurement and report output |
| Power supply | 220 V / 50 Hz; 500 W |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cork Puncture and Chip Detection Instrument | The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ... |
 |
High and low temperature universal creep testing machine | Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,... |
 |
RIDER Method Single Fiber Friction Tester | Meet the standard: JIS L1015 (Chemical fiber binding test method)， JIS L 1095 (General yarn test method)/friction coefficient Purpose: This inst... |
 |
Car seat static strength tester | Get a quote： Whats/App: +86 181 0160 0864 The Car Seat Static Strength Tester is a dedicated testing system used to evaluate the static load-bear... |
 |
Complete Footwear Breathability and Thermal Insulation Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Complete Footwear Breathability and Thermal Insulation Tester is a laboratory devi... |
Похожие товары
 |
Laser Chuck | Продавец: 00000 | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
 |
Electric Order Picker Supplier | Продавец: Jinan Hulk Machinery Co., Ltd | Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co... |
