Helmets Vertical SpacingInfrared - positioning Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The helmet vertical spacing infrared positioning tester is a specialized instrument used to measure the vertical spacing and wearing height of safety helmets. It conforms to the GB/T 2812-2006 "Safety Helmet Test Methods" standard, and some models are compatible with the updated GB/T 2812-2024 standard.
Application
This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets.
Standard
(1)GB/T 2812-2006:Test method of safety helmet
(2)GB 2811-2019:Head protection—Safety helmets
(3)EN 397:Protective helmets for industry
Features
(1)Digital display: Uses a digital display scale for intuitive readings and to avoid human error.
Modular design: Supports the replacement of different head forms, adapting to various safety helmet sizes.
(2)Efficient and convenient: Automated measurement process improves testing efficiency.
(3)Compliant with standards: Strictly adheres to domestic and international safety helmet testing standards.
Parameters
| Technical Parameter | Description |
|---|---|
| Digital height gauge | Can display height in real - time, with a measuring range of 0 - 500mm |
| Positioning method | Adopts infrared positioning |
| Sample preparation for measurement | First, wear the test sample on the head mold specified by the standard according to standard requirements, and adjust it so that the heights on both sides of the hat hoop are consistent |
| Wearing height measurement | Measure the vertical distance from the lowest point of the bottom edge of the hat hoop on the side of the sample to the top of the head mold as the wearing height, record the measured value with an accuracy of 1mm |
| Measurement of X1 | Measure the vertical distance from the position of the point on the edge of the minor axis of the helmet shell relative to the head mold to the top of the helmet shell as X1 |
| Sample re - placement for X2 measurement | Remove the wearing system and cushioning liners, place the sample on the head mold again, and ensure that the posture of the helmet shell is the same as before removal |
| Measurement of X2 | Measure the vertical distance between the same points as X2 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cigarette Draw Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Cigarette Draw Resistance Tester is designed to measure the airflow resistance... |
 |
Electronic geosynthetics comprehensive strength machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The electronic geosynthetics comprehensive strength testing machine is a device us... |
 |
Car Crash Test Dummies(Hybrid iii Dummys) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The “triple-collision dummies” do not refer to a single standardized t... |
 |
Thermal Insulation Rock Wool Thermal Load Test Device | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The thermal insulation rock wool thermal load test device is a test device develop... |
 |
NEXGEN Aviation Fuel Burner | The NEXGEN Aviation Fuel Burner is an FAA-approved, next-generation aircraft fuel combustion testing instrument. It builds upon the operational pri... |
