High Temperature Walk-In Oven/Curing Chamber

• 

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1) GB 50052: Code for design of power supply and distribution systems.

(2) GB 50054: Code for design of low-voltage electrical installations.

(3) GB 50169: Code for construction and acceptance of grounding devices in electrical installations.

(4) GB 50243: Code for acceptance of construction quality of ventilation and air conditioning works.

(5) IEC 60068-2-2: Environmental testing - Part 2-2: Tests - Test B: Dry heat.

(6) ISO 9001: Quality management systems (Production compliance).

Features

1. Mechanical Structure: Primarily composed of an electrical control system, insulated chamber system, air circulation system, heating system, humidification and water circuit system, refrigeration and dehumidification system, etc.

2. Utilizes modular insulated chamber panels, allowing for arbitrary expansion of internal volume. Easy to assemble and disassemble, with dimensions customizable by the customer.

3. The interior features SUS#304 stainless steel panels, while the exterior utilizes Baosteel A3 powder-coated steel for an aesthetically pleasing finish. Insulation layers employ PU foam or rock wool.

4. The control system incorporates imported single-point or programmable controllers with a user-friendly interface, allowing flexible parameter settings for convenient operation.

5. Refrigeration units incorporate imported European/American compressors with eco-friendly refrigerants. A dual-circuit low-temperature system design employs separate compressors for different temperature zones, extending equipment lifespan.

6. Large observation windows in interior doors facilitate monitoring of test samples.

7. The left side of the unit features a 50mm diameter test port for connecting external power or signal cables (port size and quantity are optional).

8. Utilizes imported fan motors + high/low-temperature resistant aluminum alloy circulation fans. High-quality centrifugal fans ensure powerful air circulation, eliminating dead zones and achieving uniform temperature distribution throughout the test chamber.

9. Equipped with advanced safety and protection devices: earth leakage circuit breaker, over-temperature protector, phase failure protector, water shortage protector, low-water protection, short-circuit protection, current overload protection, along with audible/visual alarms and SMS alerts.

Parameters

Structure and Material Specifications

The main system utilizes insulated sandwich panels, with combustion performance compliant with Class A1 or B2 standards of the “Classification of Combustion Performance for Building Materials.”

1. Wall Materials: All five sides of the chamber are assembled using double-sided color-coated steel insulated panels (computer color or snow white), fixed with aluminum support beams and aluminum profile edging. The floor remains untreated (insulation available upon customer request). High-temperature resistant silicone sealant is applied at joints to ensure effective chamber sealing. Aging test vehicles can be placed inside as required.

2. Single Door Opening: W800×2000mm (Double or single door available upon request).

3. Observation Window: 400×600mm tempered glass installed on the main door, enabling real-time monitoring of internal conditions during aging (or customized as required).

4. Heater Placement: Located within the ceiling air circulation duct, surrounded by fireproof insulation material. Utilizes PID temperature control modules. Upon reaching the required product temperature, the system automatically adjusts heater power based on indoor temperature fluctuations, complementing the insulation properties of the thermal panels to maintain precise and stable temperature at the set value.

Другие товары поставщика

	Suture Needle Sharpness Intensity Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Sharpness and Strength Tester for Suture Needles is a device specifically designed to d...
	Car Seat Launching Headrest Impact Test System | ISO & ECE Compliant Safety Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Pneumatic launch system with precise impact velocity control. ...
	Strip evenness tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Strip Evenness Tester is a high-performance textile laboratory instrument designed to a...
	Surface adhesion testing equipment factory price	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods for Woven Fabrics) JIS L 1085 (Testing Methods for ...
	Fire Retardant Coating Tester – Large Plate Method	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fire Retardant Coating Tester (Large Plate Method) is designed to evaluate the fire res...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...