Computer controlled memory impact testing machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics, cast stone, electrical insulation materials and other non-metallic materials impact toughness determination. The testing machine is an ideal test equipment for chemical industry, scientific research units, colleges and universities, quality testing departments, professional manufacturers laboratories and other units. It is a testing instrument with simple structure, convenient operation and accurate and reliable data.
Meet the criteria
(1)JB/T 8762-1998 "Plastic Simply supported beam Impact Testing Machine"
(2)JJG145-2007 "Verification Regulations of Pendulum Impact Testing Machine"
(3)GB3808 "Test of pendulum impact Testing Machine"
Applicable standards
(1)GB/T 1043.1-2008 "Rigid plastic simple support beam impact test method"
(2)ISO 179-1993(E) "Plastics - Determination of impact strength of simply supported beams"
Technical indicators
1. Impact energy: 2J/4J(simply supported beam); 2.75/5.5J(cantilever)
2. Sampling rate: 10us
3. Resolution: 16 bits
4. Load measurement accuracy: ≤1%
5. Impact knife Angle: 30°
6. Pendulum torque: simple beam 2.1436N.m, 1.0718N.m, 0.5359N.m
7. Cantilever beam 2.9474N.m, 1.4737N.m
8. Pendulum prelift Angle: 150°
9. Simple support beam:
1) Impact speed: 2.9m/s
2) The distance from the center of the pendulum shaft to the center of the sample: 230mm
3) Blade Angle: 30°
4) Blade radius: 2mm
5) Support corner radius: 1mm
6) Front Angle of support: 5°
7) Rear Angle of support: 10°
8) Support span: 40. 60. 70mm
9) Sample type and size (length × width × thickness)mm3:80×10×4mm, 50×6×4mm, 120×15×10mm
10. Cantilever beam:
1) Impact speed: 3.5m/s
2) The distance from the center of the pendulum axis to the center of the sample: 335mm
3) Blade Angle: 75°
4) Blade radius: 0.8mm
5) Front edge Angle: 5°
6) Blade back Angle: 10°
7) Sample type and size (length × width × thickness)mm3:
80×10×4mm
63.5 * 12.7 * 12.7 mm
63.5 * 12.7 * 6.4 mm
63.5 * 12.7 * 3.2 mm
Accessories
(1)Optional tools or attachments that support machine operation.
(2)Examples: impact sensors, sample clamps, fixtures, software modules, protective equipment.
(3)Enhance testing accuracy, safety, and adaptability for different samples.
Test Procedures
(1)Step-by-step instructions for performing memory impact tests.
(2)Includes setup, calibration, sample placement, test execution, and data recording.
(3)Ensures consistent, reliable, and repeatable test results.
(4)May include safety checks and operational troubleshooting tips.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Temperature Humidity Vibration Combined Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 The Temperature-Humidity-Vibration Combined Test Systemis an advanced reliability testing platform that... |
 |
Ultraviolet Aging Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Ultraviolet Aging Test Chamber is a laboratory testing system specifically designe... |
 |
Safety Helmet Impact and Penetration Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmet Acceleration Impact and Penetration Tester is a specialized test... |
 |
Spinous Process Fixation Plate System Fatigue Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Spinous Process Fixation Plate System Fatigue Testing Machine is a specialized... |
 |
Automotive Wire Repeated Bending Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automobile Wire Cross-linking Test Device is designed to evaluate the cross-linking performance of ... |
