Automotive Seat Entry Exit Durability Tester | OEM Vehicle Seating Test Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Four servo-electric motor-driven axes and three pneumatic functions for realistic movement.
Simulates in & out, right & left, up & down, rotation, free weight drop & recapture, and independent leg motion.
True body weight simulation (35–100kg) for realistic dynamic loading, including inertia effects.
Concurrent and programmable motion sequences for highly life-like testing.
Evaluates seat cushion, backrest, frame, foam, and fabric durability under repeated entry and exit cycles.
Adjustable test frequency, amplitude, and cycle count with automatic stop at the end of the test.
Parameters
| Parameter | Specification | Notes |
|---|---|---|
| Dummy Model | 3D indenter, 50% SAE J826-2002 | Wrapped with 12mm foam and denim |
| Pressure Head Weight | 44.5 kg | Adjustable for different test scenarios |
| Horizontal Slide | ~25 mm into cushion | Inner rear first with 30° rotation |
| Load on Pressure Head | 445 N | Maintained during creep and exit cycles |
| Rotation Angle | 30° | Simulates realistic entry angle |
| Experimental Frequency | 4.5 cycles/min | Adjustable |
| Number of Experiments | 15.000 simulated ingress/egress cycles | — |
Accessoriess
Pointer glass cover: Typically made of thickened tempered glass or acrylic, providing explosion-proof, scratch-resistant, and impact-resistant properties.
Washer: Located between the bottom of the scale and the platform, serving to absorb shock and stabilize the scale.
Zero-adjustment screw: Allows the pointer to accurately return to zero when unloaded by fine-tuning the balance system.
Weight weight: Used to measure weight.
Hook: Used to secure the weight.
Height ruler: Used to measure height.
Electronic height meter: Used to measure both height and weight.
Test Procedures
Prepare the 3D dummy indenter according to SAE J826-2002 standards. Wrap with foam and denim, and add weight to simulate realistic human mass.
Secure the seat assembly on the test bench and adjust to design position.
Program the robot motion for simulated human entry/exit:
Horizontal slide of pressure head into seat, rotating 30°
Align center line of pressure head with seat center
Creep and stabilize pressure head within the seat
Maintain 445 N load while sinking into seat
Continue creep against backrest at 30°
Maintain 445 N load as pressure head is halfway out
Slide along seat cushion edges during exit, simulating edge indentation
Start the test cycle; machine automatically repeats motions at set frequency.
Stop automatically after 15.000 simulated cycles and inspect seat for damage.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SUGA S80 Carbon Arc Weathering Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards The SUGA S80 adheres to globally recognized standards, including: IS... |
 |
Automatic Reaction Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers th... |
 |
Drawer slide durability tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Drawer slides are fundamental components in furniture, cabinetry, and... |
 |
High Velocity Impact Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purpose To test the impact - resistance performance of glasses, goggles and face shie... |
 |
Fiber Composition Analysis Machine for Textile Industry | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Fiber Composition Analyzer is an intelligent laboratory testing s... |
