Nissan Scratch Tester Manufacturer | Automotive Interior Scratch Resistance Testing Machine
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Product Features
Testing Modes
Linear Scratch: Single-pass testing for coatings and films.
Reciprocating Scratch: Multi-cycle abrasion for wear simulation.
Progressive Load: Automated load increments (0.5–50 N) for critical failure analysis.
Real-Time Monitoring
High-speed data acquisition (10.000 Hz) tracks friction, load, and displacement simultaneously.
Data Management
Cloud-compatible software stores 50.000+ test results and generates ISO/ASTM/JIS-compliant reports.
Safety & Compliance
Overload protection, emergency stop, and CE/UL certification for laboratory safety.
Technical Parameters
| Parameter | Specification |
|---|---|
| Load Range | 0.5–50 N (±0.01 N accuracy) |
| Speed Range | 1–200 mm/s (±0.1 mm/s accuracy) |
| Scratch Length | 5–100 mm (adjustable) |
| Microscope Magnification | 10–200x (4K resolution) |
| Dimensions (L×W×H) | 800×600×1.200 mm |
| Weight | 150 kg |
| Operating Environment | 15–35°C, ≤85% RH (non-condensing) |
| Power Supply | 220V/110V AC, 50/60Hz, 800W |
Accessories
Scratch Heads:
5× diamond indenter tips (Rockwell C geometry).
10× spherical stylus (1–10 mm radius).
Calibration Tools:
Load cell verifier, scratch depth gauge, and NIST-traceable certificate.
Sample Fixtures:
Pneumatic clamps for flat/curved specimens, vacuum chuck for thin films.
Software Suite:
AI analytics platform with scratch simulation, ERP integration, and 8-language report generator.
Safety Bundle:
Emergency stop, acoustic enclosure, and fume extraction port.
Ideal For:
Automotive OEMs (paint, trim, and interior coating durability)
Electronics manufacturers (screen protectors, polymer casing testing)
Medical device makers (biocompatible coating scratch resistance)
Research universities (advanced material innovation)
Test Procedures
Prepare test specimens of the required size and clean surfaces.
Mount specimens securely using double-stick tape or clamp bar.
Install scratch head and confirm weight or perform calibration.
Adjust test arm to neutral balance to ensure only head weight is applied.
Set stroke length and scratch speed according to relevant standard.
Start the test using dual-hand activation switch.
Perform multiple scratch tests on different locations as required.
Upon completion, remove specimen and visually evaluate scratch depth, continuity, and visibility.
Record results according to standard requirements.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Horizontal Vertical Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Rubber horizontal vertical flame testeris designed to simulate the early firi... |
 |
High Velocity Impact Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purpose To test the impact - resistance performance of glasses, goggles and face shie... |
 |
Building Material Smoke Density Testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product details In the event of fire, people are choked by smoke or can not escape because... |
 |
Flammable gas hazard testing system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Gas Hazard Characteristics Tester is a device used to determine the flammable concentra... |
 |
EN 779 Turbine Filter Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1) ISO 29461-1 – Air filter performance, test ... |
