.

High Precision Automotive Electrical Wire Gas Corrosion Test Equipment OEM Supplier

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Features

1. The chamber is molded from epoxy fiberglass. Asbestos board is pasted inside the jacket. It is resistant to high temperature and corrosion, lightweight, and has high strength. Both the inner and outer walls of the chamber are smooth and easy to clean.

2. The chamber cover is made of epoxy fiberglass with a top cover temperature of 100 - 200°C to prevent condensed water in the chamber from dripping directly onto the test specimens.

3. Heater: The nickel - chromium alloy heating wire heats from the bottom, forming jacket heating to ensure good temperature uniformity inside the chamber.

4. Humidification method: Humidification by a steam generator.

5. Input methods for sulfur dioxide and hydrogen sulfide: Input from cylinders, and both input and discharge are quantitatively controlled by concentration sensors.

6. Exhaust gas treatment: Install treatment devices for sulfur dioxide and hydrogen sulfide gases. After multi - stage treatment with sodium bicarbonate, the exhaust gas meets the discharge standards (the purification device is external).

Control System

1. Temperature control: Japanese Fuji temperature controller

2. Temperature input: PT100; Output: Driven by SSR

3. Display range: 0 - 100°C

4. Control range: RT + 5 - 55°C

5. Cycle used (measurement filtering): 2 - 3s

6. The main control components are products from joint - venture companies.

7. The temperature is controlled by a solid - state relay, with stable performance and no noise.

8. A fan is used for stirring and circulation inside the chamber.

9. Display and control of sulfur dioxide concentration

Technical Parameters

1. Temperature range: 10 - 55°C

2. Temperature fluctuation: ±0.5°C

3. Temperature uniformity: ±2°C

4. Sulfur dioxide gas concentration: 100ppb - 50000ppb (0.1ppm - 50ppm)

5. Hydrogen sulfide gas concentration: 10ppb - 5000ppb (0.01ppm - 5ppm)

6. Relative humidity: 75±3%

7. Tests with sulfur dioxide, hydrogen sulfide, and mixed gases of sulfur dioxide and hydrogen sulfide can be conducted.

Maintenance Information

(1) Regularly inspect gas pipelines and seals for leakage.

(2) Maintain and replace gas purification materials as required.

(3) Clean the chamber interior after testing to prevent residue buildup.

(4) Calibrate temperature, humidity, and gas sensors periodically.

(5) Ensure proper ventilation and safe operation during use.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Rubber Low Temperature Brittleness Tester
Rubber Low Temperature Brittleness Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Low Temperature Brittleness Tester determines the temperature at which rubber an...
 Dental Implants Fatigue Tester
Dental Implants Fatigue Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental...
 Qinsun Ci xenon lamp aging test chamber
Qinsun Ci xenon lamp aging test chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc...
Explosive Gas Lower and Upper Limit Testing Apparatus
Explosive Gas Lower and Upper Limit Testing Apparatus Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with the following national and international standards: GB...
Paper roughness tester for quality control
Paper roughness tester for quality control Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Paper Roughness and Air Permeability Tester (TMI) simultaneously measures the...
Все товары поставщика

Похожие товары

MMA-120 Handheld Arc Welder
MMA-120 Handheld Arc Welder Продавец: 871183 The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
SHX Series Circulating Fluidized Bed Steam Boiler
SHX Series Circulating Fluidized Bed Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
DHL Series Coal-Fired Steam Boilers
DHL Series Coal-Fired Steam Boilers Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
SZL Series Biomass Steam Boiler
SZL Series Biomass Steam Boiler Продавец: Hebei Genjux Boiler Co.,Ltd Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...