ISO 6722 Automotive Wire Vibration Wear Test Equipment Supplier Factory Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Parameters
| Parameter | Specification |
|---|---|
| Vibration Frequency | 10 Hz |
| Vibration Amplitude | 6.35 ± 0.25 mm |
| Vibration Direction | Horizontal |
| Fixed Wire Support Distance | 280 mm |
| Movable Wire Support | One point on fixed platform, other passes through guide >14× wire diameter |
| Distance Between Vibration and Fixed Table | 45 mm |
| Friction Point | Midpoint of sample (10% position) |
| Applied Mass | 10 N, 12.5 N, 15 N, 20 N |
| Abrasion Count Setting | 1–9999 cycles adjustable |
| Automatic Stop | When wire insulation is breached and conduction occurs |
Features
(1) Simulates real-world vibration conditions to evaluate wire-to-wire insulation wear.
(2) Adjustable load weights allow testing under different pressure conditions.
(3) Horizontal vibration table ensures uniform abrasion across the wire surface.
(4) Automatic shutdown prevents damage once insulation failure or short circuit occurs.
(5) Supports a wide range of cycle settings for long-term durability evaluation.
Accessories
(1) Fixed wire clamps for secure positioning.
(2) Movable wire guide supports.
(3) Set of standard weights (10 N, 12.5 N, 15 N, 20 N).
(4) Vibration control panel.
(5) Instruction manual and testing guide.
Test Procedures
(1) Install the test wires on the fixed and movable supports according to wire diameter and sample length.
(2) Set the vibration frequency, amplitude, and horizontal direction on the control panel.
(3) Select the desired load weight to apply to the wire contact point.
(4) Configure the number of abrasion cycles.
(5) Start the test; the instrument will apply horizontal vibration to the wires.
(6) Monitor the test; the machine will automatically stop if wire insulation breaks and electrical conduction occurs.
(7) Record the abrasion cycles at which failure occurs and analyze insulation wear.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Liquid Spontaneous ignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Che... |
 |
Thin Film Pendulum Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Uses of the Film Pendulum Impact Tester The film pendulum impact tester is mainly use... |
 |
Helmet vertical spacing infrared positioning tester for EN 397 safety compliance | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)GB/T 2812-2006:Test method of safety helmet (2)GB 2811-2019:He... |
 |
Helmet Xenon Aging Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet xenon lamp aging tester is a device that simulates the damage caused by long-ter... |
 |
Conveyor Belt Drum Friction Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum fricti... |
