FAA Burn-Through Resistance Tester for Aerospace Insulation Materials
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
Features
Incorporates the FAA-approved NexGen aviation fuel burner, developed to replace discontinued legacy burners (Park DPL 3400. Lennox OB-32. Carlin 200 CRD).
Retains the operational principles of previous burner generations while enabling more precise measurement of fuel and air test parameters.
Modular architecture facilitates future FAA upgrades without full system replacement.
The burner cone is fabricated from corrosion-resistant and high-temperature alloy to ensure durability in severe thermal conditions.
The NexGen burner includes key components such as baffle, fuel nozzle, igniter, fuel rail, mounting plates, ventilation duct, housing, muffler, and acoustic resistance unit.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air pressure regulator, and air temperature sensor for stable control.
A temperature-controlled ice bath system (≥ 2 × 0.14 m³) allows regulation of fuel temperature prior to combustion.
Flame characteristics can be adjusted by modifying fuel nozzle configuration and air pressure input to meet different standard requirements.
The burner is covered with a thermal insulation blanket to protect fuel lines and the burner body.
Capable of delivering flame temperature of at least 2000 ± 50 ℉ and heat flux of at least 10.6 W/cm².
Mounted on a heavy-duty steel frame that supports both horizontal and vertical specimen installation.
Calibration utilizes a thermocouple comb composed of seven grounded K-type thermocouples (1.6 mm diameter, ceramic-insulated, metal-sheathed, 30 AWG wire), fixed on an angle bracket for standardized placement on the specimen frame.
Includes a radiant heat flux sensor with cooling system, installed on a fixed support bracket for reliable measurement.
Accessories
The system is supplied with the following components:
NexGen aviation fuel burner
Flame penetration test fixture for thermal and acoustic insulation
Dynamic loading motion system
Fuel temperature control ice bath
Thermocouple calibration comb
Radiant heat flux sensor with cooling unit
Heavy-duty specimen mounting frame
Burner thermal insulation blanket
Test Procedures
Mount the test specimen on the horizontal or vertical frame according to the selected standard.
Connect aviation kerosene supply and compressed air (≥120 PSI).
Set and stabilize fuel temperature using the ice bath system.
Adjust air pressure and fuel flow parameters per test requirements.
Ignite the NexGen burner and allow the flame to stabilize.
Position the flame relative to the specimen and initiate exposure.
Monitor flame temperature and heat flux using thermocouples and sensors.
Observe whether flame penetrates the insulation material within the specified time.
Record data and evaluate performance in accordance with the applicable standard.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Salt Spray Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chambe... |
 |
Minimum Ignition Energy (MIE) – Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust sp... |
 |
16 CFR 1630 Carpet Flammability Test Equipment Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Product Features Flame-Resistant Chamber: C... |
 |
Rubber Mechanical Properties Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Rubber Sleeve Rebound Tester is designed to comply with the following standa... |
 |
Laser Compression Deformation Tester，Laser deformation measurement system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Laser Compression Deformation Tester for sealing strips is designed for automotive seal... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
