In-situ Battery Gas Monitoring Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Specification |
|---|---|
| Platform Dimensions | Determined by sample volume requirements |
| Control Cabinet | 650(L) × 675(W) × 1750(H) mm |
| Fourier Transform Infrared (FTIR) System | 650(W) × 675(D) × 1750(H) mm |
| Power Supply | AC 220 V, 30 A |
| Weight | Approximately 900 kg |
| Backup Gas Source | Nitrogen ≥ 99.99% |
Test Procedures
Sample Installation: Place battery cells into the pressure vessel and secure the chamber.
System Setup: Connect nitrogen supply and configure oxygen concentration requirements.
Parameter Configuration: Set monitoring channels for voltage, temperature, pressure, and gas analysis in the control software.
Initiate Thermal Runaway: Trigger the battery using heating, overcharge, or nail penetration methods.
Data Acquisition: Real-time monitoring of gas composition, internal pressure, temperature, and battery parameters. Automated calculation of gas evolution rate and total gas volume.
Observation and Recording: Monitor test via video feed and software interface.
Test Completion: Safely vent the vessel, retrieve battery cells, and store collected data for analysis and reporting.
Maintenance Information
Inspect vessel seals, flanges, and sampling connections regularly for integrity.
Calibrate temperature, pressure, and gas sensors periodically.
Clean sampling lines and FTIR components to prevent contamination and measurement errors.
Verify nitrogen supply, vacuum pump operation, and safety valve function before each test.
Backup all acquired test data and system logs for traceability and reporting purposes.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Complete Footwear Breathability and Thermal Insulation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Complete Footwear Breathability and Thermal Insulation Tester is a laboratory device design... |
 |
Automatic Pipe Coating Scratch Tester ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) AS/NZS AS2924.2 – Scratch resistance of coatings. (2) A... |
 |
Thermal conductivity measurement system for high temperature environments | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The flat plate thermal conductivity meter, with a water bath constant-temp de... |
 |
G506 Filter Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specification for Performance of Materials Used in Medical F... |
 |
Xenon weathering tester price GX25 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The GX25 Xenon Lamp Weathering Tester is a compact yet powerful environmental... |
