HDPE Butt fusion machine

• 

HDPE BUTT FUSION MACHINES

Butt fusion is a thermofusion process which involves the simultaneous heating of the ends of two pipe/fitting components which are to be joined, until a molten state is attained on each contact surface. The two surfaces are then brought together under controlled pressure for a specific cooling time and a homogenous fusion joint is formed. The resultant joint is fully resistant to end loads and has comparable performance under pressure to the pipe itself.
An electrical heater plate is used to raise the temperature of the pipe ends to the required fusion temperature. Butt-fusion can be used to join both PE80 and PE100 materials for the pipe sizes of 90mm and above of the same SDR.
The butt welding machines used to weld PE pipes have controls to ensure the welding parameters are strictly adhered to. The following parameters are controlled:

• heater plate temperature
• ovality and alignment
• interface pressure
• bead width
• heat soak time
• changeover time

Control of these is necessary to ensure premature failure of the weld does not occur. The field conditions under which PE pipe is welded have a considerable effect on the strength of the joint. In order to achieve an acceptable weld three elements are essential:

• Cleanliness: because contamination will ruin joints
• Technique: Most owners of PE pipe systems require that people performing butt welding of PE pipes are qualified by completing a recognized training course.
• Correctly designed equipment with proper maintenance: Correct welding temperatures, welding procedures and pipe facing tools must be maintained in tolerance and in good condition.

The resulting joint, if it has been properly made, is as strong as the original pipe and can withstand all the loads applied during routine installation and operation.
During the fusion process internal and external ‘weld beads’ are formed. Techniques have been developed to minimize the size of the beads, however as they do not add anything to the overall strength they may be safely removed if required. The removed weld beads can be inspected as part of a quality control programme.

Другие товары поставщика

	HDPE Butt Welding Equipment	MM-Tech (Hebei MingMai Technology Co.,LTD) is the largest manufacturer of SWT seriresFusion Machinesof rugged and dependableButt Fusion Equipmental...
	SWT-UME Multifuction hot air welder to produce awnings and marquees	Tarpaulin Welding Heat Gun,Repairing tarps with hot air gun,Automatic tarpaulin welding machine for PE fabric,Banner & Tarpaulin Welder,Hot ai...
	SWT-NS1600S High frequency thermofusible materials welding machine	Product Description Specification Power 1600w Welding Speed 1.0-10.0 m/min Heating Temperature 20-620 degree Weldi...
	SWT-ZW4000 Plastic Sheet Bending Equipment	SWT series Butt Fusion Welding Machine are suitable for welding thermoplastic sheets made of HDPE, PP, PVC, PVDF.The machine is designed according ...
	SWT-NS1600S High frequency thermofusible materials welding machine	Product Description Specification Power 1600w Welding Speed 1.0-10.0 m/min Heating Temperature 20-620 degree Weldi...

Похожие товары

	Resistance Loop Bands	Продавец: Shanghai Pisces Sporting & Leisure Products Co., Ltd	Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility...
	erw pipe making machine	Продавец: Shijiazhuang Great Wall Welded Pipe Equipment Co., Ltd.	erw pipe making machine HG76 high frequency straight seam welded pipe production line The...
	Corona Plasma Treatment Machine	Продавец: Shenzhen Naen Technology Co,. Ltd	Corona surface treatment and Plasma surface treatment equipmentis used to “prime” a s...
	Plasma Etching Cleaner	Продавец: Shenzhen Naen Technology Co,. Ltd	The plasma etch process is the removal of certain material from another substrate surface to leav...
	Rotary Jet Plasma Treater	Продавец: Shenzhen Naen Technology Co,. Ltd	Rotary Jet Plasma Treaterconsists of a control host and a direct-injection spray gun: the host is...