API brass/steel angle valve china manufacturer,cast iron angle valve flange type
Specifications
1. Brass body & cartridge(Cu57Pb3), zinc alloy handle, polishing, chrome plated.
2. CE, ISO9000.
Technical Requirement:
1. Before assembling, all parts should be clean, no oil or grease. Remove all burrs and sharp edges.
2. Before connecting, body cap male thread should be coated with sealing glue.
3. Handle turn or close freely.
4. After assembling, test by water at pressure no less than 0.8Mpa, no leakage.
Other details:
Handle: ABS with chrome coated
Cartridge: Brass quick open
O-ring: NBR
Nut: Brass with polishing&chrome
Ring: Brass
Body: Forged brass with Polishing&Chrome
Decoration disc: Stainless steel
Connection: Male
Size: 1/2"x3/8" ; 1/2"x1/2"
Remark:
Brass Grade: 57-3 ( Cu>57%, Pb<3%)
No obvious spots, scratches on surface.
Другие товары поставщика
|
|
304 316 stainless steel welded flange, Neck Flanges, Pipe Fittings Forged Flange |
Size: from 1/2 to 24 inch(DN1000-DN6000) Materials: Carbon Steel, Stainless Steel, Alloy Steel Standard: ASME, JIS(KS), ANSI, API, MSS, AWWA, DIN, ... |
|
|
stainless steel Electric open /closed plug valve, honeywell solenoid gas valve |
Caliber: DN600-3600 Nominal pressure: 0.05,0.1,0.25 MPa Applicable temperature: ≤ 250 ℃ Applicable medium: gas and toxic, flammable, toxic gases... |
|
|
ANSI API WCB/stainless steel globe valve,stop globe valve |
1.forged steel valve with pressure from the tight seal, valve manifold ends for soldering connection or flange connection. 2 valves sit, the valve ... |
|
|
316 stainless steel,butt weld tee pipe fitting |
SS304 316 stainless steel tee Size: DN10-DN200, 1/2"-8" or as required Standards:DIN,3A,SMS,ISO,IDF, RJT Material:,AISI304,AISI316L Finish: Mirror... |
|
|
Stainless steel pneumatic cut off Valve,flange connection pneumatic control valve |
Caliber: DN200-1400 Nominal pressure: 0.25,0.6 MPa Applicable temperature: ≤ 250 ℃ Fast opening time :1.5-3 seconds Applicablemedium: gas and to... |
Все товары поставщика
Похожие товары
