China Gate Valve

• 

What isGate valves

are widely used for all types of applications and are suitable for both above-ground and underground installation. Not least for underground installations it is paramount to choosethe right type of valveto avoid high replacement costs.

Gate valvesare used to shut off the flow of liquids rather than for flow regulation. When fully open,the typical gate valvehas no obstruction in the flow path, resulting in very low flow resistance. The size of the open flow path generally varies in a nonlinear manner as the gate is moved. This means that the flow rate does not change evenly with stem travel. Depending on the construction, apartially open gate can vibrate from the fluid flow

Gate valvesare mostly used withlarger pipe diameters (from 2" to the largest pipelines)since they are less complex to construct thanother types of valvesin large sizes.

Main gate valve parts of a gate valveare:body, seat, gate, stem, bonnet and actuator. The main operation mechanism is very simple. When the handwheel is turned, it rotates the stem, which is translated into the vertical movement of a gate via threads.

There are three ways to classify the gate valve.

Types of Disk

Solid taper wedge

Flexible wedge

Split wedge or Parallel disks Valve

Types of Body Bonnet Joint

Screwed Bonnet

Bolted-Bonnet

Welded-Bonnet

Pressure-Seal Bonnet

Types of Stem movement

Rising Stem or OS & Y Type (Outside Stem and Screw Type)

Non-rising Stem type

Gate valvesare used in almost all fluid services such asair, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services.

Some special gate valve is used in slurry and powder product also such as knife gate valve

Другие товары поставщика

	Socket End Resilient Seated Gate Valve	Features DIN3352 ， 63mm-315mm The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellen...
	Swing check Valve	Product Descriptionof DIN3202 F6 90° Swing Standard Designstandard DIN3202 F6 Flange drilling standard EN1092-2 PN10,PN16,PN25 ...
	DIN3202 F1 Y Strainer	Product Description Standard of Designstandard DIN3202 F1 Flange drilling standard EN1092-2 PN10,PN16 Facetofacestandard EN558...
	Flexible rubber disc check valve	Product Descriptionof Technical Parametersof Nominaldiameter(mm) 50～400 50～400 Nominalpressure(Mpa) Testingpressure Shell(Mp...
	Huahui Gate Valve	Product Description , DN50-DN450 Features The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and ...

Похожие товары

	RV-02 AC Electric Power Source Air Blower Cost-Effective Pressure Relief Valve	Продавец: Greentech Industry (Jinan) Co., Ltd	RV-02A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle...
	RV-01A High-Pressure Aluminium for Aquaculture Environmental Protection OEM	Продавец: Greentech Industry (Jinan) Co., Ltd	RV-01A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle...
	200WOG Thread Globe Valve	Продавец: Wenzhou Chenyu Valve Co., Ltd	200WOG Thread Globe Valveis a type of valve designed to regulate or isolate the flow of liquids o...
	Forged Steel Gate Valve	Продавец: Wenzhou Chenyu Valve Co., Ltd	Forged Steel Gate Valveis a robust and high-performance type ofGate Valveprimarily used for relia...
	RV-01A High-Pressure Aluminium for Aquaculture Environmental Protection OEM	Продавец: Greentech International (Zhangqiu) Co., Ltd	RV-01A pressure relief valveAir Blower pressure relief valve is installed on the inlet &outle...