• 

Description of Cryogenic Gate Valve:The main material of ZECO cryogenic gate valve is selected. Considering from the metallographic aspect, in addition to austenitic steel, copper and aluminum with face centered cubic lattice, general steel will appear low temperature brittleness at low temperature, thus reducing the strength and service life of the valve. When the temperature is higher than -100℃, choose ferritic steel; when the temperature is lower than -100℃, choose austenitic steel; low pressure and small diameter valves can choose copper and aluminum and other materials.Stem and fastener is selected, when the temperature is higher than -100℃, stem and bolt materials adopt Ni, Cr-Mo alloy steel, through appropriate heat treatment, to improve tensile strength and prevent thread bite.Austenitic stainless steel is used when the temperature is higher than -100℃.Low hardness of 18-8 acid resistant steel will cause mutual abrasion between stem and packing, causing leakage of packing.Therefore, the stem surface must be hard chrome plated (thickness 0.04-0.06mm), or nitride and nickel-phosphorous plated to improve surface hardness.In order to prevent nuts and bolts from biting to death, the nuts are generally made of Mo steel or Ni steel and coated with molybdenum disulfide on the surface of the threads.

Features of Cryogenic Gate Valve:1.The valve body of ZECO cryogenic gate valve is able to withstand expansion and contraction due to temperature changes without permanent deformation of the seat structure due to temperature changes;2.The bonnet of ZECO cryogenic gate valve is constructed with a long neck bonnet to protect the stuffing box.The long neck bonnet design also facilitates winding of cooling material;3.ZECO cryogenic gate valve uses flexible wedge or open wedge. These structures maintain a reliable seal regardless of temperature;4.The low temperature properties of the material, such as compression resilience, tightening force, tightening pressure distribution and stress relaxation, are taken into account.

Material of Cryogenic Gate Valve:

We are one of leadingchina ball valve manufacturersand cryogenic ball valve suppliers. Choose us to buy Valve China.

Другие товары поставщика

	3 Inch Butterfly Valve	Description of butterfly valve 3 inch: ZECO 3 inch butterfly valve is a small diameter butterfly valve, usually manually operated, and the connect...
	Check Valve	The check valve for water of ZhengFeng is the advanced pipe control equipment at home and abroad, mainly installed at the entrance of hydropower st...
	Resilient Gate Valve for Underground	Basic information Thisunderground butterfly valveis used as a two-way closed circuit device. Features 2. Does not affect the traffic, and undergro...
	Cast Steel Gate Valve	Description of Cast Steel Gate Valve: ZECO cast steel gate valve Chinais in controlled under the quality assurance system of production and manufa...
	Pump Control Valve	Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small flui...

Похожие товары

	Клапан	Продавец: RongTengXinNuo(Tianjin) International Trade Co.,Ltd	Клапан
	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...