Pressure Relief Valve

• 

This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value.

Festures of cold water pressure relief valve

Accurate Pressure Control

Fast Opening to Maintain Line Pressure

Slow Closing to Prevents Surges

Completely Automatic Operation

Inlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.

Pressure Relief Valve Installation and Commissioning

The pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve and Gate Group.

Pressure Relief Valve Material and Standard

Size Range: 2"~24"

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions: AMSE B16.10, EN558-1

Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2

Coating: Fusion Bonded Epoxy Coating

Inspection and Test: ISO 5208 / EN 12226-2

As one of pressure relief valve suppliersand pressure relief valve manufacturers, we can offer kinds of related products for sale, if you want to buy pressure relief valve, please contact us.

If you want to know more kinds of check valve, please visit our website.

Другие товары поставщика

	Metal Seated Gate Valve	Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland...
	Stainless Steel Gate Valve	Description of Stainless SteelGate Valve: ZECO stainless steel gate valve is basically used for pipelines with corrosive media. For any kind of sta...
	Dirt Separator	Basic informationThis valve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the cavity body;3. Dirt...
	Balancing Valve	ZhengFeng is currently the only manufacturer in China with accurate KV data and support debugging services. We have our own dynamic water testing s...
	Forged Ball Valve	Description of Forged Ball Valve: ZECO forged ball valve is divided into forged two-piece ball valves and forged three-piece ball valves, as wel...

Похожие товары

	China Gate valve	Продавец: Yuanda Valve Group Co.,Ltd.	China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis...
	Gate Valve Vs. Ball Valve	Продавец: Yuanda Valve Group Co.,Ltd.	Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used...
	Non Return Valve Suppliers China	Продавец: Yuanda Valve Group Co.,Ltd.	Non Return Valve Suppliers China refers to the opening and closing member for the circular v...
	Common Types Of Check Valves	Продавец: Yuanda Valve Group Co.,Ltd.	Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ...
	Brass ball valve	Продавец: Yuanda Valve Group Co.,Ltd.	Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia...