Universal Abrasion Resistance Tester

• 

Introduction
·The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close andfleeceand other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials. The test sample may be dry or immersed in water, oil, or other liquids.
·The instrument is mainly composed of control system and friction system. The sample is installed on the clamp and is tightened. The upper fixture with the sandpaper is going down, adjust the position of the weight so that the sandpaper in contact with sample surface, through the control system set the number of friction times of the sample, and start the instrument. The lower fixture base does front-to-backmotion, so that the sample and sandpaper being rubbed against each other. When the number of times the movements reach the set value, the instrument stops and remove the sample to observe the degree of wear.
·Suitable for testing all kinds of fabrics, including wear performance and wear resistance of clothing, shoes and industrial textiles.

Standards
·ASTM D3514/D3885/D3886，AATCC 119/120，FTMS 191/5300/5302，FORD EFB 15J2/BN 112-01

Accessories
·Frosted accessories
·Cloth edge and fold between the friction sample
·Elastic friction pad
·Abrasive 50 yards / roll
·3 rating cards for ASTM D3514

Technical Parameters
·The test runs in automatic mode, ensuring both accurate of the test results with repeatability and eliminating the need for the operator to evaluate the test results;
·The advanced gripping device ensures constant sample tension;
·With a flat-grinding test head (inflatable membrane type of wear test method) and a mill-grinding test head and the required weight and the initial abrasive;
·Built-in timer and mechanical cycle counter;
·The machine with a reciprocating table, flat grinding / mill grinding test head mounted on top;
·Clamping ring inner diameter: 94 mm;
·Lock ring height: ≤9.5 mm;
·Speed: 120 ± 15/min;
·Moving: 25 mm;
·Air pressure: 62 kPa (9 psi);
·Dimensions: 330 × 500 × 460mm (length × width × height);
·Weight: 33kg (72lb);
Power: 120/230 V, 50/60 Hz, 2A / 1A.

Другие товары поставщика

	Automatic Wrinkle Recovery Tester	Wrinkle Recovery Tester Testing Standards: AATCC 128, ISO 9867, ENKA 3061 Applications: AATCC Wrinkle Recovery Tester is used to determine a fa...
	coatings hardness test machine scratch tester apparatus	With the Shear / Scratch Tester, you can evaluate resistance to shearing, scratching, gouging, marring, scraping and engraving on a variety of flat...
	Electrostatic Attenuation Testing machine	Static Honest Meter - это измерительный прибор для ослабления статического электричества, наиболее подходящий для исследования диффузности статичес...
	Electrostatic Voltage Attenuation Tester	Static Honest Meter is a measuring instrument for attenuation of static electricity, most appropriate for investigating the diffusibility of static...
	flexometer	Bally Flexing Tester (Flexometer) is designed for flexing resistance test to bending or other types of failure at flexing creases. The Flexometer ...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...