din abrasion resistance tester for rubber and plastic
Все товары поставщика
DIN Abrasion tester, which is the original product & is designed to conform to the DIN 53516, DIN ISO 4649. This top quality and highly popular abrasion tester determines the resistance of elastomers in regard with the frictional loss on rubber products, such as tires, conveyor belts, hoses, footwear, floor covering etc. Since wear is always a result of abrasion, different test methods have been developed for the simulation of long term wear.
Standard：
DIN 53516, JIS K6369 ，GB/T 20991，GB 20265-2006，GB20266-2006，SATRA TM174，BS 903，JIS K6264，GB/T9867，ISO4649
Main Principles:
What a load under a certain level in gauze, grinding a cylindrical cross-section sample determined stroke on the gauze surface, by measuring the amount of wear quality of the sample, and then by the density of the sample to calculate the volume of the amount of abrasion, in order to the test comparable, and finally be subject to the standard rubber, the test results are expressed as relative volumetric wear to verify the amount of gauze-based or full representation with respect to the amount of wear of a certain standard wear rubber base.
Main Feature:
With a small sample, save time, friction way of non-repetition, low noise, high efficiency, good reproducibility and easy to operate and so on.
Din rubber abrasion tester main parameters:
1. The test piece: φ16mm, 6 ~ 15mm (D)
2. Clamp load: 2.5N
3. Weight load: 2.5N, 5N
4. The fixture lateral displacement volume: 4.2mm / wheel every lap
5. Abrasive cloth: 60 #
6. Roller Diameter: 150mm
7. Roller Length: 460mm
8. The roller speed: 40rpm
9. predetermined stroke: 40m / 20m
10. Wear Speed: 0.32m / sec
11. Inclination: 3 ° test piece and the roller support shaft vertical angle
12. Volume: 70 × 30 × 30cm
13. Weight: 61kg
14. Power source: 1∮, AC220V, 3A
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermal Contact Resistance Testing Apparatus | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Chrysler Bending Test instruments | Brief IntroductionChrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,ie mec... |
 |
Oxygen Index Test Apparatus | (Limiting)OxygenIndexTestApparatusTestingStandards:ISO4589-2,ASTMD2863,GB/T2406,GB/T5454Applications:ThisOxygen Index Testerisusedtodeterminethelow... |
 |
Abrasion & wear testing machine with Rotary Platform Dual (Double) Head | taber abrasion & wear testing machine is commonly referred to as the Taber Abraser (Abrader) or Rotary Platform Dual (Double) Head Tester. Firs... |
 |
Auto Air Permeability Test Apparatus for Fabric | Testing Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
