Qinsun Dry Cleaning and Washing Cylinder

• 

Dry Cleaning and Washing Cylinder, to determine color fastness to drycleaning and chlorinated pool water(AATCC 162), and applied to prepare samples for flammability testing of standard 16CFR-1610. Dry Cleaning and Washing Cylinder complies with AATCC 162, 16CFR-Part1610, etc.
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.

Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610 Standard for the flammability of clothing textiles.

Operation
● Clean the dry cleaning cylinder
● prepare the hardness concentrates according to the relevant standards.
● 51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
● If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
● 5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
● Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
● Get out the sample and remove the excess solution.

Technical Parameters
Items Parameters
Dimension 72L X 49W X 62H (cm)
Structure Stainless steel
Surface treatment Wiredrawing treatment
Transport weight 80kg
Power supply 220V 50HZ max.0.05A

Другие товары поставщика

	Wyzenbeek Abrasion Tester	Wyzenbeek Abrasion Tester Testing Standards: ASTM D4157 Applications: Wyzenbeek Abrasion Testeris used to determine the abrasion resistance of f...
	Тестер воздухопроницаемости для медицинского текстиля	Тестер воздухопроницаемости Тестер воздухопроницаемости текстильных тканей соответствует ASTM D737, ISO 9237/7231, BS 5636 и т. Д. Он используется ...
	Fabric softness tester	Softness Tester, to determine the softness of leather and coated fabrics and other soft materials. Softness tester does not need samples to be cut ...
	Economic Salt Spray Corrosion Resisting Testing Chamber	Salt Spray Tester is used to create a salt spray fog in a controlled test environment. The anti-corrosion quality of materials pr...
	Manual Friction Fastness Tester	Sublimation Fastness Testeris suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance t...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...