Wire bending tester
Product Introduction:
Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thickness, and fixed in the fixture with adjusted spacing. After rotating the wheel 200 times, the degree of damage, cracking, crack and conductor strand breakage rate are checked. It has the characteristics of simple operation and excellent performance, can be positive and negative operation, and can be set to automatically stop after reaching the number of times.
Technical parameters:
1, fixture action: manual
2, fixture spacing: 0——500mm adjustable
3, the total number of times: 0-999999 times can be manually set
4. Test rate: 20 times/min
5, off-center: 50, 75, 100, 150mm
6, the diameter of the parallel section of the sample: φ4mm, φ6mm, φ8mm, φ10mm, φ12mm,φ15mm, φ18mm, φ20mm
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Electronic crockmeter | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
 |
Large Flame Flammability Tester | IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
 |
Tooth torsion yield tester | Applicable standards: YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dent... |
 |
Oxide film abrasive tester | Applicable standards: GB/T 12967: This standard specifies in detail the test method for determining the average wear resistance of aluminum and al... |
 |
Gloss Meter | Industry Applications: In industries such as inks, paints, varnishes, coatings, and wood products, gloss meters are used to measure the surface glo... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
