Rubber low temperature brittleness testing machine

• 

Product Introduction:

Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according to GB/T 15256 and GB/T5470 standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.

Technical parameter:

1, temperature control range: -80℃ （room temperature ≤25℃） （there are -60, -70, -80℃ three models for customers to choose）

2, cooling speed:

0 ℃ —— 1.2 ℃ —— 20 ℃ / min

- 20 ℃ —— 1.0 ℃ to 30 ℃ / min

- 30 ℃ —— 0.7 ℃ to 60 ℃ / min

-40℃——-60℃ about 0.7℃/min

-60℃——-80℃ About 0.5℃/min

Note: The use environment is used at room temperature （23-25 ℃）， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.

3, after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃

4, overall size: 900×505×800mm （length × width × height）

5, the overall size of the studio: 220×170×70mm （length × width × height）

6, cooling medium: ethanol or other non-freezing liquid

7, mixing motor: 15W

8, working power supply 220V——240V,50Hz,2kW

Другие товары поставщика

	Bio-absorbable Internal Fixation Plates and Screws Tester	Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia...
	Catheter Leakage and Compliance Tester	Standards YY/T, etc. Main Uses The catheter leakage and compliance tester is mainly used to detect the leakage and compliance of medical catheters ...
	Automatic voltage internal resistance test device	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instruments ...
	Face Mask Tensile Strength Testing Machine (for Face Mask Tensile Tester)	Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ...
	Standard pacifier safety meter	In the infant care industry, bottle quality directly impacts infant health. The NPNZ-01 Baby Bottle Mechanical Performance Tester is specifically d...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...