Spinal Internal Fixation System Component Testing Machine
Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Все товары поставщика
Все товары поставщика
Standard
- YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connectors.
- ASTM F2193-18 (International): Defines methodologies for evaluating the static and fatigue performance of spinal implant constructs.
- ISO 12189-1: Additional compliance for mechanical testing of spinal implant components under physiological loading.
Product Advantages
- Universal Testing Compatibility: Modular design accommodates screws (3.5–7.5 mm), plates (20–100 mm length), and rods (4.5–6.5 mm diameter).
- Multi-Axis Loading: Simultaneous axial/torsional/shear loading replicates complex in vivo stresses.
- High-Frequency Stability: 0.1–15 Hz dynamic control with ±0.05% force accuracy.
- Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with protein skimmer.
- AI-Powered Analytics: Machine learning algorithms predict failure modes from initial test cycles.
- Regulatory Compliance: Pre-loaded protocols for FDA/CE submission requirements.
Product Features
- Electromagnetic Servo Actuators: 50 kN axial/25 Nm torsional capacity with programmable load ratios (R=0.1–10).
- 6-DOF Kinematic System: Replicates flexion/extension, lateral bending, and axial rotation (±20° range).
- Dynamic Load Control: 0.1–15 Hz frequency range with programmable waveforms (sine, square, random).
- Thermal-Mechanical Chamber: -20°C to +50°C temperature control with 10–95% RH humidity.
- High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.
- Safety Suite: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Axial Force | ±50,000 N (50 N resolution) |
| Max. Torsional Moment | ±25 Nm (0.1 Nm resolution) |
| Angular Range | ±20° (0.001° resolution) |
| Frequency Range | 0.1–15 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Temperature Control | -20°C to +50°C (PT1000 sensors) |
| Humidity Control | 10–95% RH (non-condensing) |
| Data Acquisition | 100 kHz sampling rate (16-bit resolution) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 3,500W |
| Dimensions (W×D×H) | 2,200 × 1,600 × 2,300 mm |
| Weight | 1,400 kg (including environmental chamber) |
| Noise Level | <65 dB (A-weighted) |
Accessories
- Spinal Component Fixture Kit:
- Self-centering screw clamps (3.5–7.5 mm)
- Plate/rod bending jigs with laser alignment
- Universal connectors for hybrid constructs
- Thermal-Mechanical Chamber:
- 25L capacity with rapid cooling/heating (15°C/min)
- 316L stainless steel interior with HEPA filtration
- BioTest Pro Software:
- Automated FEA validation and fatigue limit calculation
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.5–50 Nm)
- Specimen alignment gauges (ASTM F2193 compliant)
- Calibration Bundle:
- NIST-traceable force/torque calibration weights
- Angular encoder verification tool
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure with 30 dB noise reduction
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Whole shoe breathability and heat preservation testing machine | Whole shoe breathability and heat preservation testing machine - Other test instrument - standard Product Information: Main uses: The whole shoe... |
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): D... |
 |
rain tester AATCC 35 BS EN ISO 22958 | Standards: AATCC 35. BS EN ISO 22958 Applications: Rain Tester is designed for determining the water-repellent property of fabrics or composite ... |
 |
Molten Metal Penetration Resistance Tester | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
 |
Gelbo Flex flexing chamber | Standards: YY/T 5056.6 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 4: ... |
Похожие товары
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Продавец: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Продавец: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Продавец: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Продавец: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Продавец: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
