Model Coin-cell Swelling System

The Model Coin-Cell Swelling System is designed for in-situ measurement of thickness and volume changes of coin-type lithium-ion cells during charge and discharge processes. The system adopts high-precision non-contact laser displacement sensing to capture micron-level swelling behavior under controlled temperature and pressure conditions. It provides reliable and repeatable data for material screening, structural optimization, and safety evaluation of coin-cell batteries.

Application

(1) In-situ swelling and thickness change measurement of coin-type lithium-ion cells during cycling.

(2) Expansion behavior evaluation of standard coin-cell formats including 2032, 2025, and 2016.

(3) Screening and comparison of electrode materials such as graphite, silicon-based anodes, and solid-state electrolytes.

(4) Mechanical stability and fatigue analysis of electrode stacks under pressure cycling.

(5) Thermal–mechanical coupling analysis under high-temperature and low-temperature environments.

(6) Safety and reliability assessment during fast charge, overcharge, and abuse testing.

(7) R&D validation and quality consistency evaluation for laboratory-scale battery development.

Standards

(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.

(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test (reference method).

(3) IEC 62660-2 – Secondary Lithium-Ion Cells – Reliability and Abuse Testing.

(4) DIN 51221 – Testing of Adhesives – Determination of Tensile Shear Strength (reference for deformation testing).

(5) CE Certification – Conformité Européenne.

Features

(1) Micron-level non-contact laser displacement measurement with high repeatability.

(2) High-resolution detection of subtle thickness and volume changes in coin cells.

(3) Multi-environment testing capability with integrated temperature chamber.

(4) Dynamic pressure loading for electrode stack fatigue and structural response analysis.

(5) Eight-channel parallel testing to improve screening efficiency and data consistency.

(6) Laser-guided positioning system for precise coin-cell alignment.

(7) Automatic thermal drift compensation during long-term cycling tests.

(8) Dual redundant safety protection with emergency stop function.

(9) Glovebox-compatible design for oxygen- and moisture-sensitive chemistries.

Parameters

Parameter	Specification
Displacement Range	±500 μm (linear), ±0.5° (angular)
Linear Measurement Accuracy	±0.05 μm
Angular Measurement Accuracy	±0.005°
Displacement Resolution	0.1 μm
Temperature Range	-20°C to 150°C
Temperature Ramp Rate	≤ 2°C/min
Pressure Range	0–10 bar
Test Channels	8 channels
Data Acquisition Rate	10,000 points/s/channel
Power Supply	AC 100–240 V, 50/60 Hz
Dimensions (W×D×H)	400 × 350 × 600 mm
Weight	65 kg (net) / 80 kg (gross)

Accessories

(1) Non-magnetic coin-cell holders for 2032, 2025, and 2016 formats.

(2) Laser displacement sensor modules.

(3) Temperature-controlled environmental chamber.

(4) Pressure loading and control unit.

(5) Data acquisition and analysis software.

(6) NIST-traceable displacement calibration standards (100 μm, 500 μm).

(7) Gas purification cartridge for inert atmosphere operation.

(8) Humidity sensor with data logging function.

Test Procedures

(1) Install the coin cell into the designated non-magnetic holder.

(2) Align the coin cell using the laser-guided positioning system.

(3) Set temperature, pressure, and cycling parameters according to test requirements.

(4) Initiate the charge/discharge process and start in-situ displacement monitoring.

(5) Record real-time thickness and swelling data throughout the test cycle.

(6) Export test data for further analysis, comparison, and reporting.

Maintenance Information

(1) Periodically calibrate the laser displacement sensors using certified standards.

(2) Inspect coin-cell holders and pressure components for wear or deformation.

(3) Clean optical and sensing components to maintain measurement accuracy.

(4) Verify temperature and pressure control performance at regular intervals.

(5) Maintain software updates and perform routine data backups according to laboratory procedures.

Другие товары поставщика

	Water Leak Detector	The Water Leak Detector primarily measures the volume and rate of gas released when a substance reacts with water, used to determine the packaging ...
	Textile Thermal Insulation Property Tester	Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective clothing and industrial fabrics. BS 6526:1998 (...
	Cold Environment Chamber	Features and Benefits 1.Ultra-wide high and low temperature range (-120°C to +150°C), meeting the testing requirements of multiple scenari...
	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
	Self - tapping Tester	Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...