Photovoltaic module backplane peeling strength testing machine

The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength of photovoltaic module backplanes, ensuring the durability and reliability of solar panels. This testing machine complies with the IEC 61730-2 standard, which is critical for assessing the safety and performance of photovoltaic modules.

This equipment is essential for manufacturers and quality control laboratories focused on photovoltaic modules, as it helps verify the adhesion strength of backplanes, which is vital for the longevity and safety of solar panels. By using this testing machine, users can identify potential weaknesses in module construction and improve product quality. The device is designed for ease of use and accuracy, making it a valuable tool in the photovoltaic industry. Please note that the information provided is intended for industry professionals and should be used as a reference.Buyers are advised to ensure they meet all relevant qualifications and regulatory requirements before purchasing.

Application

(1) Measurement of backplane peeling strength in framed and frameless PV modules

(2) Verification of adhesion quality for module encapsulants and backsheet materials

(3) Evaluation of module mechanical reliability during design and production stages

(4) Compliance testing for safety and durability assessment per IEC 61730-2

(5) Identification of potential defects in module lamination processes

Standards

(1) IEC 61730-2 – Photovoltaic (PV) Module Safety Qualification: Part 2 – Mechanical Testing

(2) Optional: ISO 178 – Plastics – Determination of Flexural Properties

(3) Optional: ASTM D1876 – Peel Resistance of Adhesives (T-Peel Test)

(4) CE Certification – Conformité Européenne

Features

High Precision Load Application: Rated load capacity of 500 N ensures accurate simulation of peeling forces.

Adjustable Peeling Method: 0–180° peeling angle accommodates a wide range of testing scenarios.

Digital Display: Real-time monitoring of test speed (50–500 mm/min) and applied force.

Consistent Glass Speed: Maintains 50±5 mm/min for reliable testing of PV module surfaces.

Maximum Stripping Force Measurement: Capable of measuring ≥200 N for backplane adhesion evaluation.

User-Friendly Operation: Simple setup with accurate, repeatable results, suitable for laboratory environments.

Parameters

Parameter	Specification
Rated Load	500 N
Travel Distance	210 mm
Digital Display Test Speed	50–500 mm/min
Peeling Method	0–180° (adjustable)
Glass Speed	50 ± 5 mm/min
Maximum Stripping Force	≥200 N

Accessories

(1) PV module clamps and mounting fixtures

(2) Digital force display unit

(3) Software for data acquisition and test result recording

(4) Calibration weights and verification tools

(5) User manual and compliance documentation

Test Procedures

Mount the PV module securely on the test fixture.

Set the desired peeling angle (0–180°) and test speed (50–500 mm/min) on the digital display.

Apply the rated load to initiate the peeling test.

Monitor real-time force and displacement via the digital display.

Record the maximum stripping force and peeling behavior data.

Repeat the test for multiple samples as required for statistical validity.

Analyze the results to evaluate backplane adhesion strength and consistency.

Maintenance Information

Regularly inspect clamps, fixtures, and load application components for wear or damage.

Calibrate digital display and load sensors periodically to maintain measurement accuracy.

Keep the test area clean and free from dust or moisture to prevent contamination.

Lubricate moving parts and guide rails as recommended by the manufacturer.

Store the machine in a dry, temperature-controlled environment when not in use.

Другие товары поставщика

	Solid Material Burning Rate Analyzer	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test...
	Automatic voltage internal resistance tester	The Automatic Voltage & Internal Resistance Tester is a precision electrical testing instrument designed for rapid and accurate measurement of ...
	Guidewire Pushing Force Tester	Standards YYT0807 - 2010 YY/T0663.2 - 2016 ASTMF2394 - 2007 Main Uses The guidewire pushing force tester is a precision testing tool in the med...
	Damp Heating Chamber for PV Modules	Features and Benefits 1.Support wet heat (85 ° C /85%RH) and extended temperature/humidity, comprehensive PV module aging test. 2.Compliance ...
	Infusion device Leakage negative pressure tester	The Infusion Device Leakage Negative Pressure Tester is designed to evaluate the airtightness of syringes, infusion sets, and related medical devic...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...