Vehicle Cabin Air Filter Tester

The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters used in automobiles. It measures particulate matter filtration efficiency, pressure drop, and dust holding capacity, providing accurate and repeatable data essential for product development, quality control, and regulatory compliance. The tester combines advanced aerosol generation, dust dispersion, and particle counting systems to simulate real-world operating conditions and capture reliable performance indicators.

Application

This tester is widely used in automotive R&D centers, filter manufacturing facilities, quality control laboratories, and third-party testing institutions. It is suitable for testing cabin air filters of passenger vehicles, commercial vehicles, buses, and specialized transport equipment. The instrument evaluates filter performance under controlled airflow, particle loading, and environmental conditions, providing insights into efficiency, airflow resistance, and dust holding capacity. It supports product validation, development of high-efficiency filters, compliance verification with international standards, and routine quality assurance in production lines.

Standards

The Vehicle Cabin Air Filter Tester is designed in accordance with the following standards:

(1) DIN 71460-1: Road vehicles – Air filters for passenger compartments of motor vehicles – Part 1: particulate matter filtration tests

(2) ISO/TS 11155-1: Road vehicles – Air filters for occupants’ compartments – Part 1: particulate filtration test

(3) GB/T 14295-2019: Automotive air filter performance testing

(4) GB/T 13554-2020: Road vehicle air filter testing methodology

Product Features

(1) Generates and controls airflow rates from 70 to 700 m³/h to simulate real operating conditions.

(2) Accurately measures pressure drop across the filter from 0 to 1000 Pa.

(3) Provides a filter adapter to securely mount filters up to 300 × 600 mm in size.

(4) Standardized test section of 180 cm² ensures consistent airflow distribution.

(5) Integrated environmental sensors continuously monitor temperature, relative humidity, and atmospheric pressure.

(6) Dust disperser (SAG 410/L) delivers controlled dust load from 2 to 245 g/h.

(7) Aerosol generator (ATM 220) produces test aerosols for precise performance evaluation.

(8) Electrostatic neutralizer (EAN 581) removes charges from aerosols to ensure measurement accuracy.

(9) High-precision particle counter (TOPAS spectrometer LAP321) measures particle size and concentration.

(10) Automated control and data acquisition system supports test sequences, real-time monitoring, and reporting.

Technical Parameters

Parameter	Specification
Air Flow Rate	70–700 m³/h
Pressure Difference	0–1000 Pa
Filter Adapter Size	300 × 600 mm
Test Section Cross-Section	180 cm²
Environmental Sensors	Temperature, Relative Humidity, Atmospheric Pressure
Dust Disperser	SAG 410/L (2–245 g/h)
Aerosol Generator	ATM 220
Electrostatic Neutralizer	EAN 581
Particle Measurement	Laser aerosols, TOPAS spectrometer LAP321
Power Supply	400 V AC, 16 A
Test Bench Dimensions	460 × 120 × 340 cm (L × W × H)

Accessories

(1) Dust disperser SAG 410/L

(2) Aerosol generator ATM 220

(3) Electrostatic neutralizer EAN 581

(4) TOPAS spectrometer LAP321 particle counter

(5) Filter adapters of various sizes

(6) Environmental monitoring sensors

Operation and Maintenance

(1) Install the filter securely on the adapter and ensure proper sealing.

(2) Set airflow, dust load, and test duration according to test requirements.

(3) Start the test bench and monitor environmental conditions in real-time.

(4) After completion, record efficiency, pressure drop, and dust holding capacity results.

(5) Clean the dust disperser, aerosol generator, and filter housing regularly to maintain accuracy.

(6) Calibrate particle counters and sensors periodically to ensure compliance with international standards.

Другие товары поставщика

	Building material flame retardancy test furnace	Technical parameters Gas used: methane flow rate (35 ± 0.5)L/min, its purity is greater than 95%, air flow rate (17±0.2)L/min Speci...
	Leather edge oil fatigue testing machine	The Leather Edge Oil Fatigue Testing Machine is designed to evaluate the fatigue resistance of edge coatings applied on leather, synthetic leather,...
	Horizontal Combustion Tester ISO 6941 Horizontal Burning Test Equipment	Product Overview TheHorizontal Combustion Testeris a standardized instrument designed to evaluate the flame propagation characteristics of textile...
	Diaper Anti-Side Leakage Performance chamber	Meet the standard: Compliant with GB: GB/T 28004.1 Diapers Part 1: Baby Diapers. GB/T 28004.2-2021 Disposable diapers—Part 2:Disposable dia...
	Fiber Crimp Elasticity Test machine	Product Introduction: YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber. Crimp elasticity, crimp recovery rate index...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...