UV Viewing Cabinet
The UV Viewing Cabinet is a precision instrument designed to detect and analyze fluorescent substances in a wide range of materials. By providing controlled ultraviolet (UV) and visible light exposure, it allows accurate observation, comparison, and documentation of fluorescence for quality control, impurity detection, and material authentication.
Application
(1) Coatings and paints: Detect and analyze phosphors in plastics, paints, and coatings.
(2) Aluminum foil: Examine fluorescent substances in aluminum foil and related materials.
(3) Paper: Test for fluorescent substances in various types of paper.
(4) Plastics: Detect fluorescence in plastics and other polymer materials.
(5) Quality control: Evaluate material uniformity and detect impurities.
(6) Research and development: Study fluorescent behavior of new compounds or coatings.
(7) Non-destructive testing: Examine samples without damaging or altering them.
Standards
(1) GB/T 16422.3 – Fluorescent inspection methods for non-metallic materials.
(2) GB/T 14522 – Material fluorescence testing standards.
(3) ASTM G154 – Standard practice for fluorescent testing of non-metallic materials.
(4) ISO 4892-3 – Plastics exposure to laboratory light sources for fluorescence testing.
(5) SAE J2020 – Automotive exterior parts fluorescence inspection.
Features
(1) Integrated UV light sources at 254 nm (short-wave) and 365 nm (long-wave) for excitation of different fluorescent compounds.
(2) D65 standard visible light source for comparison under controlled white light conditions.
(3) Camera system for capturing and documenting sample fluorescence images.
(4) Light-tight chamber for controlled environment and operator protection.
(5) UV filter (200×50 mm) to regulate emitted UV light.
(6) Host unit for centralized control and image analysis.
(7) Picture comparison function for side-by-side observation of samples under UV or visible light.
(8) Non-destructive testing, supporting quality control, impurity detection, and material authentication.
Parameters
| Parameter | Specification |
|---|---|
| Ultraviolet wavelength | 254 nm, 365 nm |
| Filter size | 200 × 50 mm |
| Visible light | D65 standard illuminant |
| Power supply | AC 220V, 50Hz |
| Standard configuration | Host unit, picture comparison system |
Accessories
(1) Host unit
(2) Camera system for image capture
(3) UV filters
(4) Picture comparison system
(5) Power cable and manual
Test Procedures
(1) Place the sample inside the UV Viewing Cabinet.
(2) Select the UV wavelength (254 nm or 365 nm) or the visible light source (D65) as required.
(3) Activate the light source and allow the sample to be illuminated under controlled conditions.
(4) Observe the fluorescence visually or capture images using the integrated camera system.
(5) Use the picture comparison function to analyze differences between samples or compare with reference standards.
(6) Record and document the observations for quality control or R&D purposes.
Maintenance Information
(1) Keep the chamber clean and free from dust or residues that may affect UV exposure.
(2) Inspect UV lamps and filters periodically for damage or reduced output.
(3) Handle the camera system carefully and avoid exposure to excessive UV light.
(4) Ensure all electrical connections are secure and the power supply is stable.
(5) Avoid direct eye exposure to UV light during operation.
(6) Follow manufacturer guidelines for servicing and lamp replacement.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Vehicle Cabin Air Filter Tester | The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters ... |
 |
Leather thickness tester | Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f... |
 |
Tensile and Shear Tester STD - FB1 - A | The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "shear"-performed by artisans and professionals when judging a fab... |
 |
Battery Adiabatic Calorimeter | Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
