Commercial dry cleaner

The Commercial Dry Cleaner is a high-performance rotary and hydrocarbon-based dry cleaning machine designed for professional textile care and industrial applications. Engineered for precision, efficiency, and environmental compliance, it is suitable for large-scale garment care, industrial degreasing, and metal surface cleaning. The machine integrates advanced digital controls, eco-friendly refrigerants, and energy-efficient systems to ensure sustainable and reliable operation.

Application

(1) Professional Dry Cleaning – Suitable for hotels, luxury garment care centers, and commercial laundries.

(2) Industrial Textile Care – Ideal for cleaning uniforms, workwear, and protective clothing in factories and institutions.

(3) Degreasing & Cleaning – Used in metal surface cleaning and industrial equipment maintenance.

(4) Laboratory & R&D – Can be applied for textile testing, material cleaning studies, and process optimization.

(5) Garment Quality Assurance – Ensures that textiles are cleaned without damage, maintaining fiber integrity and appearance.

Standards

(1) BS EN ISO 3175 – Textile machinery and commercial dry cleaning requirements.

(2) M+S P66+67 – Safety and performance standards for commercial dry cleaning machines.

(3) AATCC 158 – American Association of Textile Chemists and Colorists standard for dry cleaning testing.

(4) ISO 14001 – Environmental management compliance for sustainable manufacturing.

(5) EU Eco-label – Certification for environmental performance.

(6) CE Safety Approvals – Compliance with European safety directives.

Features

(1) Digital Precision Control – Microprocessor-based speed controller with preset counter (1–9999 rpm).

(2) Energy Efficiency – Motors designed to reduce power consumption by up to 30%.

(3) Eco-Friendly Refrigerants – Compatible with R600a or R134a for low environmental impact.

(4) Water Recycling System – Up to 95% water reuse to minimize resource consumption.

(5) Robust Construction – Durable rotary drums and hydrocarbon systems for continuous industrial use.

(6) Versatile Cleaning – Capable of processing a wide range of textiles, including delicate and industrial fabrics.

(7) Local Support – 24/7 technical assistance and customized maintenance programs.

Technical Parameters

Parameter	Specification
Abrasive	AFS 50 to 70 test grit (~200 microns)
Grinding Wheel Speed	200 rpm
Abrasive Flow Rate	300–400 g/min
Test Load	45–130 N
Grinding Wheel Diameter	228 mm
Chlorobutyl Rubber Hardness	A 58–62 (Shore durometer)
Speed Controller	Microprocessor-based digital preset counter
Power Supply	AC 220V/50Hz (typical, depending on model)
Dimensions (L×W×H)	Model-dependent
Weight	Model-dependent

Accessories

(1) Standard rotary drum attachments.

(2) Hydrocarbon solvent system kit.

(3) User manual and compliance certificate.

(4) Optional water recycling module and spare parts kit.

Test Procedures

(1) Fill the machine drum with the required textiles or materials.

(2) Set the appropriate cleaning mode, speed, and test load via the digital controller.

(3) Add cleaning solvent or hydrocarbon as needed.

(4) Start the machine, allowing rotation and cleaning cycles to run automatically.

(5) Monitor digital readouts for cycle completion and speed control.

(6) Upon completion, safely unload textiles and process solvent/water recycling as required.

Maintenance Information

(1) Regularly inspect drum, bearings, and seals for wear.

(2) Clean filters and solvent lines to prevent clogging.

(3) Calibrate speed controller and sensors periodically.

(4) Replace worn abrasive wheels or brushes according to operating hours.

(5) Follow manufacturer’s guidelines for safe handling of hydrocarbon solvents.

Другие товары поставщика

	Plastic ball indentation hardness meter	Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
	Safety Helmets Wearing Stability Tester	Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ...
	Adiabatic Self - Accelerating Decomposition Temperature Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H...
	Whole shoe breathability and heat preservation testing machine	Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athlet...
	STD Lithium battery explosion test chamber	Introduction: Lithium battery combustion and explosion experiment chamber is mainly used for thermal runaway combustion and even explosion experim...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...