Torsion Testing Tester
The Universal Torsion Testing Machine is a precision instrument designed to measure torque and evaluate the mechanical properties of materials and components under torsional loads. It is capable of testing a wide range of specimens, including springs, wires, tubes, bars, and chains. The machine supports both unidirectional and bidirectional torsion, making it suitable for diverse applications in quality control, research, and production environments.
Application
(1) Measuring torsional strength and ductility of wires, bars, tubes, springs, and other components.
(2) Evaluating torsional fatigue and performance under repeated twisting cycles.
(3) Quality control of metallic materials in manufacturing and production lines.
(4) Research and development of new materials requiring torsional property assessment.
(5) Testing left-hand and right-hand torsion for engineering components.
(6) Laboratory testing for educational and scientific research purposes.
Standards
(1) GB/T 239.1-2012 – Metal Materials Wire Part I: Unidirectional Torsion Test Method.
(2) GB/T 239.2-2012 – Metal Materials Wire Part II: Bidirectional Torsion Test Method.
(3) ISO 7800:2003 – Test Method for Unidirectional Torsion of Metal Wires.
(4) ISO 9649:1990 – Test Method for Bidirectional Torsion of Metal Wires.
(5) ASTM, JIS, and DIN standards related to torsion testing of metallic materials.
Features
(1) Evaluates torsional ductility and maximum torsional strength.
(2) Supports both unidirectional and bidirectional torsion tests.
(3) Reveals material defects and inconsistencies under torsional stress.
(4) Compliant with multiple national and international standards.
(5) Provides controlled and repeatable testing parameters, including twisting speed and sample length.
(6) Suitable for a wide variety of materials, including wires, bars, tubes, springs, and chains.
(7) Versatile testing capabilities for torsion, breakage, and fatigue analysis.
Parameters
| Parameter | Specification |
|---|---|
| Clamping wire diameter range | 3.0–5.0 mm |
| Distance between fixtures | 500 mm |
| Twisting speed | 30–60 r/min |
| Power supply | AC 220V, 50Hz |
| Noise level | <70 dB(A) |
Accessories
(1) Main torsion testing machine
(2) Sample clamps for different diameters
(3) Adjustable fixture supports
(4) Power cable and user manual
Test Procedures
(1) Secure the specimen between the two clamps.
(2) Set the torsion mode: unidirectional or bidirectional.
(3) Adjust the twisting speed and number of rotations as required.
(4) Start the test; for unidirectional torsion, the sample rotates 360° in one direction until the specified cycles or failure.
(5) For bidirectional torsion, the sample rotates 360° in one direction, then reverses for the same number of cycles until failure.
(6) Record torsion angle, torque, and failure data for analysis.
Maintenance Information
(1) Inspect clamps, fixtures, and moving parts regularly for wear or misalignment.
(2) Keep the machine clean and free from dust and debris.
(3) Check electrical connections and power supply stability.
(4) Lubricate rotating and moving components periodically as per manufacturer guidelines.
(5) Ensure calibration is maintained for accurate torque and angle measurements.
(6) Handle specimens and fixtures carefully to prevent damage to the machine or samples.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Falling ball impact testing machine | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
 |
Sharp edge tester | Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ... |
 |
Mask Visual Field Tester丨Mask Visual Field Test machine | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: EN 1... |
 |
PV Hail Impact Tester | Standard Compliance IEC 61215: Mechanical load testing for terrestrial photovoltaic modules. UL 61730: Safety standards for photovoltaic modules ... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. ISO ... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
