Ball Rebound Tester

• 

The Ball Rebound Tester is a specialized device used to evaluate the elastic properties of materials. It quantifies the rebound characteristics of a material by simulating the height to which an object (such as a steel ball) rebounds after freely falling and impacting a sample.

Applications

This machine is designed and manufactured according to GB/T6670-97. It is suitable for determining the falling ball resilience of soft polyurethane foams. The instrument calculates the maximum rebound height of the steel ball and the percentage of the falling height of the steel ball by the steel ball with a given diameter and quality falling freely on the foam sample at a specified height, and the rebound rate represents the resilience of the foam. The machine uses microprocessor to control, touch screen Chinese display, and can print test data. The machine has the characteristics of safety, reliability and high measurement accuracy.

Standards

DIN EN ISO 8307 :2018 :Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2018)

ASTM D 3574:Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

Features

Touch Screen Control;

With Print Function;

Easy Operation and no need of extra installation. Machine can be used once you received it.

Technical Parameters

Accessoriess

Host a set (including release mechanism, capture mechanism)

One set of control boxes

Test Procedures

1. Sample Preparation

Cut the sample according to the standard (usually circular, with a diameter ≥ the diameter of the steel ball), and ensure the thickness meets the requirements (e.g., rigid foam ≥ 25mm, soft rubber ≥ 6mm).

2. Equipment Calibration

Adjust the verticality of the guide rail and calibrate the drop height (e.g., 100mm, 200mm), ensuring that the steel ball release point is aligned with the center of the sample.

3. Sample Placement

Place the sample on the platform, ensuring there are no wrinkles or bubbles on the surface and that it is in full contact with the platform.

4. Steel Ball Release

Activate the electromagnetic release, allowing the steel ball to fall freely and impact the sample.

5. Rebound Measurement

The system automatically records the highest point of the first rebound of the steel ball and calculates the rebound rate (usually the average of 5 tests).

6. Data Recording

Output the rebound rate, test conditions (temperature, humidity), and sample information.

Другие товары поставщика

	Rubber Sleeve Rebound Tester	The Rubber Sleeve Rebound Tester is designed to evaluate the resilience and compression performance of collection needle rubber sleeves. It measure...
	Office Chair Caster Durability Tester	The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, structural reliability, and service life of office chair ...
	Dry Sand Rubber Wheel Wear Tester	Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...
	Spring torsion tester	The Spring Torsion Tester is designed to precisely measure torsional properties, including torque and angle, for a wide range of torsion springs an...
	Digital Sock Stretch Tester丨Digital Sock Stretch chamber

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...