SKTJ-10 carbon fiber adhesive strength tester
Executive standard
CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate
Product introduction:
This instrument is recommended product of CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate, suitable for testing the adhesive strength between carbon fiber reinforced polymer laminate and concrete in the civil construction structure. According to the adhesive strength and the destroy form, it can instantly obtain the test results.
Features:
New structure, outstanding advantage, convenient operation, with adhesive standard block conversion curves, the intensity (MPa) and force value (KN) is convertible
Digital meter features: liquid crystal display, direct force reading, peak holding, data storage, curve correction, automatic shutdown
Configuration:
1. Host
2. Digital pressure meter
3. Testing accessories
4. Drawing test blocks (9pcs standard configuration)
Technical parameters:
Main technical parameters
Maximum tension: 10kN range: 10mm
Nominal oil pressure: 25MPa
Displacement and speed ratio: 0.14mm/n
Resolution: 0.01MPa
Measurement accuracy: 1.5%
Standard test block specification: Φ 40mm
Host weight: 2.3 kg
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Ультразвуковой дефектоскоп SKC61 | Purpose Testing building foundation piles by crosshole ultrasonic wave method . Inspecting concrete defects by ultrasonic method, such as uncom... |
 |
SKC71 Ultrasonic Cross-hole Automatic Pile Testing System | Purpose Testing of building foundation piles by cross-hole sonic logging; Inspection of concrete defects by ultrasonic method, such as uncompacted,... |
 |
SKZY-10/20/30 anchor shank tension tester | Executive Standard GB50367-2006 Design code for strengthening concrete structure Product introduction: The instrument is suitable for testing the a... |
 |
SK-75 brick test hammer | Brief introduction: Submit to standard of GB/T50315-2000, the instrument is applied to test light material such as brick, light bone concrete etc. ... |
 |
SK-40/60 Multifunction strength tester | Executive standard(CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method(JGJ 110-2008) Testing stan... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
