3KW 150l Xenon Lamp Aging Test Chamber Air Cooled
Detailed Product Description
| standard: | Xenon Weathering Test Chamber | Xenon Lamp: | 3KW |
|---|---|---|---|
| Inner Dimension: | 800x800x800 | Humid. Range: | 65%— 98% R. H |
| Temp. Range: | RT-85º C | Wind Speed: | 1~1.5m/s |
| Highlight: |
3kw xenon lamp aging test chamber 150l xenon lamp aging test chamber air cooled xenon lamp aging tester |
||
Product introduction
Air Cooled Xenon Lamp Testing Chamber is used to determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of Geotextile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.
Test Standards
ISO4892-2 ;ISO11341;IS 15351;IS7903;AATCC16E ;AATCC169(1);AATCC TM 16
JASOM346-93;GMW3414TM Ford Interior;ASTM G155-1;ASTM G155-4;ISO 105 B02
Fetures
1. Presetting various specifications, Custom program capability, meet diverse range of standards, including AATCC, ISO, BS, IS ,JIS etc;
2. Colorful touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance, temperature (BPT, BST, chamber), humidity, and plot dynamic curve of them. The operator simply selects the required test module and test standards; English user interface, diagram indicate condition of chamber, easy to use;
3. PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
4. Chamber temperature control, irradiation temperature, and heater raise the temperature, air conditioning refrigeration.
5. Custom program capability and storage for additional user-defined tests.
6. Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing. Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably;
7. Use driving clutch to connect turntable and motor, it makes turntable rotate freely and put sample easily without stopping unit;
Parameters
| Temperature range | RT ℃ ~ +80 ℃ light irradiance |
| Spectral wavelength | 290nm～800nm irradiance range 500W～1200W/㎡ |
| Temperature fluctuation | ≤±0.5℃ |
| Temperature uniformity | ≤2℃ |
| Cooling rate | 0.7～1℃/min (non-linear) |
| Heating rate | 3～5℃/min (non linear) |
| Humidity range | 30%～98%R.H |
| Humidity fluctuation | 3%～4% R.H |
| Black board temp. | 63+3℃ |
| Light Irradiance Deviation | ± 0.01W / m2 |
| Rainfall time/Rainfall cycle | 1~9999min, adjustable/1~240min,interval is adjustable |
|
Water supply system |
Reservoir Water: 20L The water supply for humidification is controlled automatically, and the water for cooling of the lamp is circulated. |
| High radiation intensity control | can reach 2 sun or higher levels |
| Xenon light source | Air-cooled xenon lamp 3KW, life of more than 1200 hours, easy to disassemble |
| Insulation material | quality polyurethane foam 100mm |
| Inner box material | imported SUS304 stainless steel |
| Outer box material | size high quality cold rolled steel plate paint |
| Sensor | Platinum resistance; Pt100Ω/mv |
| Dimensions of the working chamber(mm) | (500×600×500)(W×D×H) 150L |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
NFPA 701-1 Flammability Tester | Introduction This tester mainly based on NFPA 701 R & D and the United States NFPA 701 that provides fabric and film flame propagation test me... |
 |
Smoke Detector Test Tunnel，Standard Smoke & Heat Detector Test Tunnel | Application The Smoke Fire Detector Threshold Test Chamber is suitable for: Threshold verification of point-type smoke fire detectors. Repeatabi... |
 |
Carpet Dimensional Stability Tester | Standard ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability) ISO 2551(Textile Floor Coverings - Determination of Dimens... |
 |
Initial Bonding Strength Testing Apparatus | The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril... |
Похожие товары
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Продавец: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Продавец: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Продавец: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Продавец: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Продавец: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
