.

High Low Temperature Test Chamber

Features and Benefits

1.Adopt advanced temperature control system, the controller according to the feedback signal accurately regulate the cooling and heating system, so that the temperature is kept within the set range.

2.The temperature range of the high and low temperature test chamber is from -70 ° C to 150 ° C (higher and lower temperatures can be customized), which can meet the requirements of high and low temperature environment simulation.

3.Through reasonable design of air duct and circulation system, the temperature inside thechambercan be evenly distributed,the temperature uniformity ≤2℃.

4.The user can set the temperature curve, the number of cycles, the holding time and other parameters in advance to achieve automatic testing, improve the test efficiency and repeatability.

Specifications

Model

STD TR5-100

STD TR5-225

STD TR5-500

STD TR5-1000

Internal Dimension (mm)

400*500*500

500*600*750

700*800*900

1000*1000*1000

Overall Dimension (mm)

900*1050*1620

1000*1140*1870

1200*1340*2020

1500*1540*2140

Interior Volume

100L

225L

500L

1000L

Heat load

1000W

Temperature Range

A : -20℃~+150 ℃

B : -40℃~+150 ℃

C: -70℃~+150 ℃

Temperature Fluctuation

± 0.5 ℃

Temperature Deviation

± 2.0 ℃

Humidity Range

20% ~ 98% RH

Humidity Deviation

± 2.5% RH

Cooling Rate

5 ℃ / min

Heating Rate

5 ℃ / min

Controller

Programmable color LCD touch screen controller,PC Link, R-232 interface

Temperature Sensor

PTR Platinum Resistance PT100Ω/MV A-class

Humidity sensor

Dry and wet bulb sensor

Heater

Nichrome heater

Cooling system

Mechanical compression refrigeration system

Refrigerating unit

French TECUMSEH compressor

Refrigerant

Environmentally friendly refrigerant

Humidifier

External isolation, stainless steel surface evaporation humidifier

Dehumidification system

Evaporator

Air circulation

Centrifugal wind fan

Water supply system

Automatic water supply; Water purification system

Safety device

Humidifier dry-combustion protection; over-temperature protection;

over-current protection; Refrigerant high-pressure protection; Water shortage protection,

Earth leakage protection;

Exterior material

Steel Plate with protective coating

Thermal insulation

Polyurethane foam

Observation window

Interior lighting , double-layer thermo stability silicone rubber sealing

Standard configuration

1 Cable hole (Φ 50.) with plug; 2 shelves

Timing Function

0.1~999.9 (S,M,H) settable


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Spectrophoto meter
Spectrophoto meter Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri...
Film Heat Shrinkage Tester
Film Heat Shrinkage Tester The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio...
Battery Electrode Resistance Tester
Battery Electrode Resistance Tester Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement o...
Friction and wear testing machine
Friction and wear testing machine It can perform flat grinding, curved grinding, edge grinding, folded edge grinding, and abrasion resistance tests such as anti-frosting, edge seali...
Hot Tack Tester / Heat Seal Tester
Hot Tack Tester / Heat Seal Tester Main Uses of the Hot - Tack Tensile Tester The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking and heat...
Все товары поставщика

Похожие товары

Gas Oxidizing Property Tester
Gas Oxidizing Property Tester Продавец: Standard International Group (HK) Limited Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
Battery Powder Compaction Density Measurement System
Battery Powder Compaction Density Measurement System Продавец: Standard International Group (HK) Limited The Battery Powder Compaction Density Measurement System is a precision testing system designed...
Battery Powder resistance tester
Battery Powder resistance tester Продавец: Standard International Group (HK) Limited The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
KES-SESRU surface roughness/friction tester
KES-SESRU surface roughness/friction tester Продавец: Standard International Group (HK) Limited TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Продавец: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...