Thermal cycle wet freezing testing machine

The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental testing, capable of simulating extreme temperature and humidity conditions. It provides precise control and high repeatability for accelerated aging, condensation resistance, and reliability testing of batteries, photovoltaic modules, and electronic components. Its dual-chamber design ensures simultaneous wet and dry testing, enabling efficient evaluation under multi-environment conditions.

Application

(1) Environmental performance testing of lithium-ion batteries and battery modules

(2) Design qualification and type approval testing for photovoltaic (PV) modules

(3) Reliability and durability testing of electronic control units (ECUs) and PCBA

(4) Research and development for automotive and renewable energy components

Standards

(1) IEC 61215 – Terrestrial Photovoltaic (PV) Modules: Design Qualification and Type Approval

(2) UL 1073 – Safety of Enclosures for Electrical Equipment

(3) ISO 16750-4 – Road Vehicles: Environmental Conditions and Testing for Electrical and Electronic Equipment

(4) CE Certification – Conformité Européenne

(5) RoHS Compliance – Restriction of Hazardous Substances

(6) Optional: IEC 60068 series for environmental testing of electronic equipment

Features

Extreme Environmental Simulation: -40°C to +85°C operational range; 98% RH humidity control.

Ultra-Stable Performance: ±1°C temperature stability and ≤±2°C uniformity across chamber.

Rapid Transient Response: 10°C/min heating and 7°C/min cooling with auto-tuning PID.

Energy Efficiency: Advanced insulation and heat recovery for 40% lower power consumption; ECO mode for idle periods.

Safety Features: Dual overload protection, thermal cutout, current-limiting breaker, and door interlock.

User-Friendly Interface: 10” touchscreen HMI with preloaded test profiles and customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with real-time alerts via SMS or .

Glovebox Compatibility: Controlled oxygen and moisture levels for sensitive component testing.

Parameters

Parameter	Specification
Temperature Range	-40°C to +85°C (operational)
Temperature Fluctuation	≤ ±1°C
Temperature Deviation	≤ ±1°C (steady state)
Temperature Uniformity	≤ ±2°C (empty chamber)
Heating Rate	10°C/min (typical, configurable)
Cooling Rate	7°C/min (typical, configurable)
Humidity Range	30%–98% RH (non-condensing)
Humidity Deviation	±3% FS (at 85% RH ±2%, 90% RH ±2%)
Chamber Volume	500 L (standard), expandable to 1,500 L
Power Supply	380V/415V, 3-phase, 50/60Hz
Dimensions (W×D×H)	1,200 mm × 1,800 mm × 2,000 mm
Weight	800 kg (net) / 1,200 kg (gross)

Accessories

(1) Universal sample racks (4 pcs, adjustable for batteries, PV modules, or PCBAs)

(2) Humidity sensor calibration capsules (10 pcs)

(3) Software Suite: EnviroTest Pro license for Windows/Linux, including 1-year cloud test report access

(4) Calibration and Safety: NIST-traceable temperature/humidity logger, emergency portable eyewash station

(5) Maintenance Kit: Spare heating elements, refrigerant filters, chamber cleaning solution (non-corrosive)

(6) Documentation: Multilingual quick-start guide, compliance certificates for IEC/UL/ISO standards

Test Procedures

Install test samples in universal sample racks and close chamber doors securely.

Set test parameters on the touchscreen HMI or select a preloaded IEC/UL test profile.

Adjust target temperature, humidity, heating/cooling rate, and test duration as required.

Start the test sequence; system performs automated ramping and environmental cycling.

Monitor real-time conditions via touchscreen or remote connectivity.

At completion, allow chamber to return to ambient temperature before retrieving samples.

Export test reports via software interface for analysis.

Maintenance Information

Regularly inspect and clean chamber surfaces to avoid residue accumulation.

Replace HEPA filters, heating elements, and refrigerant filters as recommended by the manufacturer.

Perform NIST-traceable calibration of temperature and humidity sensors annually.

Verify door interlocks and emergency shutdown circuits before each test series.

Store the unit in a dry, ventilated environment when not in use.

Другие товары поставщика

	Metal Wire Wrap Tester	The Metal Wire Wrap Tester is designed to evaluate the ductility and winding performance of metallic wires. It measures the ability of wires to wit...
	Fabric Textile Color Fastness After Washing Lab Testing Instrument	Product Description This Fabric Textile Color Fastness test equipment is used to determine the color fastness of kinds of fabrics subjected to was...
	Falling ball impact testing machine	Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material...
	Stain resistance tester for architectural coatings	Product Introduction The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often ...
	Xenon Light Fastness Test Chamber	Features and Benefits 1.Full-Spectrum Xenon Lamp Xenon arc lamps emit a continuous spectrum from UV to visible and infrared, closely simulating...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...