Micro Controll Four-ball Friction Tester

• 

The microcomputer-controlled four-ball friction testing machine uses a sliding friction method under point contact pressure conditions at the extreme point, and is primarily used to differentiate the low, medium, and high extreme pressure performance of lubricants, including three indicators: maximum non-seizure load PB, sintering load PD, and comprehensive wear value ZMZ.。

Application

The microcomputer-controlled four-ball friction testing machine can also be used for testing the anti-wear performance of lubricants. With special accessories, it can also perform end-face wear tests and measure the friction coefficient of friction pairs. This machine is mainly suitable for industries such as petrochemicals, iron and steel metallurgy, transportation, and higher education institutions.

Standards

When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the following relevant national or international standards:

GB/T 12583 - 98: Method for Determination of the Extreme - Pressure Properties of Lubricants (Four - ball Machine Method).

GB 3142 - 82: Method for Determination of the Load - Carrying Capacity of Lubricants (Four - ball Method).

SH/T 0189 - 92: Method for Determination of the Anti - wear Properties of Lubricating Oils (Four - ball Machine Method).

SH/T 0202 - 92: Method for Determination of the Extreme - Pressure Properties of Greases (Four - ball Machine Method).

SH/T 0204 - 92: Method for Determination of the Anti - wear Properties of Greases (Four - ball Machine Method). These standards specify the requirements for the test methods, test conditions, data processing, etc. of the four - ball friction testing machine to ensure the accuracy and comparability of test results.

Feature

High-precision testing: Utilizing four spheres, it provides more accurate and reliable test data.

Easy operation: Users simply set the required test parameters and press the start button; the testing machine will then automatically begin the test.

Wide applicability: Suitable for long-term wear testing, friction force measurement, friction coefficient calculation, lubricant load-carrying capacity evaluation, and more.

Simulation of real working conditions: Test parameters can be adjusted according to actual working conditions to better simulate the real working environment.

Two testing modes: Supports both automatic and manual testing, offering flexibility and versatility.

These features make the micro-controlled four-ball friction testing machine an indispensable piece of equipment in fields such as materials science, mechanical engineering, and lubrication technology.

Parameters

Accessoriess

The accessories of the microcomputer-controlled four-ball friction testing machine include the spindle drive system, oil bath and heater, test force sensor, friction force measurement system, microcomputer-controlled hydraulic loading system, computer control system, standard steel balls, and wear scar measurement device (such as a microscope and micrometer system).

Test Procedures

Preparation: Check the testing machine for proper functioning, the oil level of the lubricant in the oil tank, the power connection, and ensure all components are intact.

Sample Installation: Select the appropriate steel ball according to the test requirements and install it on the four supports of the testing machine.

Parameter Setting: Enter the test parameters on the operating panel of the testing machine, including rotational speed, load, and test time.

Starting the Equipment: Start the testing machine and begin the test, observe the equipment's operation to ensure all parameters are stable.

Data Recording and Analysis: After the test is completed, turn off the equipment and retrieve the test results, then record and analyze the data.

Другие товары поставщика

	Carpet Peel & Tuft Test device	Product Details For tufted carpets or traditional carpets, an important parameter is the retention performance of their tufts. Poor - quality car...
	Plastic ball indentation hardness tester	The Plastic Ball Indentation Hardness Tester is a precision instrument designed to evaluate the mechanical and hydraulic performance of plastic dra...
	Office Chair Caster Durability Tester	The Office Chair Caster Durability Tester is designed to evaluate the rolling durability, structural reliability, and service life of office chair ...
	Luggage Walked Wear Test Machine	This product is used for suitcases, bags, strollers with wheels… Through the test mileage and test speed, to check the heat resistance, rupt...
	Battery Diaphragm Gas Permeability Tester	The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluate the gas permeability of battery diaphragms and separat...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...