Diaper Anti-Side Leakage Performance Tester

The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side leakage performance of diapers. It is widely used in the research and development, quality control, and performance testing of baby diapers, adult diapers, sanitary napkins, and other absorbent hygiene products. This instrument provides reliable, quantitative data to guide material design, production optimization, and product performance improvements.

Application

(1) Baby diapers, training pants, and pull-up diapers

(2) Adult incontinence diapers and absorbent briefs

(3) Sanitary napkins, panty liners, and menstrual products

(4) Absorbent underpads, bed pads, and protective sheets

(5) Nonwoven materials, superabsorbent polymers (SAP), and top sheet materials

(6) Liquid barrier and acquisition layers in diaper prototypes

(7) Laboratory testing of raw materials and finished products

(8) Production line quality control and pre-shipment inspection

Standards

The instrument is designed to meet multiple national and international standards, including:

(1) GB/T 28004.1-2021 — Diapers Part 1: Baby Diapers

(2) GB/T 28004.2-2021 — Disposable Diapers Part 2: Adult Diapers

(3) EDANA 152.0-99 — Absorbency Test Method for Nonwoven Materials

(4) ISO 9073-11 — Textiles — Test Method for Liquid Loss in Nonwovens

(5) ASTM F1911 — Standard Test Method for Absorbency of Disposable Hygiene Products

(6) JIS L 1096 — Testing Methods for Disposable Absorbent Products

Features

(1) Measures key liquid retention and leakage properties for accurate performance evaluation.

(2) Adjustable pressure and timing controls to simulate real usage conditions.

(3) Suitable for various product types, including baby and adult diapers, sanitary napkins, and absorbent pads.

(4) High-precision measurement ensures repeatable and reliable results.

(5) User-friendly interface for easy operation and monitoring.

Parameters

Parameter	Specification
Test range	0–500 ml (depending on instrument model)
Measurement accuracy	±0.5 ml
Sample diameter	40 mm
Test area	20 cm²
Pressure range	0–200 kPa (or higher)
Time control	0–999 s
Power supply	AC 220V, 50/60 Hz
Overall dimensions	Dependent on model
Weight	Dependent on model

Accessories

(1) Main unit ×1

(2) Sample holders ×2

(3) Instruction manual ×1

(4) Power cable ×1

(5) Calibration weights or pads (if applicable)

Test Procedures

(1) Prepare the sample and place it in the designated holder.

(2) Adjust the test pressure and set the required test time.

(3) Pour the standard test liquid onto the sample.

(4) Start the test and allow the instrument to measure liquid loss and side leakage.

(5) After the test, record the measurement data.

(6) Clean the sample holder and instrument surface before the next test.

Maintenance Information

(1) Regularly clean the sample holder, test platform, and liquid channels to prevent residue buildup.

(2) Check electrical connections and ensure proper grounding before operation.

(3) Calibrate the instrument periodically to maintain measurement accuracy.

(4) Avoid exposure to corrosive liquids or extreme environmental conditions.

(5) Replace worn or damaged parts promptly according to the manufacturer’s instructions.

Другие товары поставщика

	Sanitary Napkin Absorption Speed Tester	The Sanitary Napkin Absorption Speed Tester is designed to measure the absorption speed of sanitary napkins, menstrual pads, diapers, and other abs...
	Residual Ethylene Oxide Gas Chromatography System	The Residual Ethylene Oxide Gas Chromatography System is a professional analytical instrument designed for the detection and quantification of resi...
	Helmet Impact Acceleration Measurement Device	Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance p...
	Automatic freezing point pour point cold tester	Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f...
	Compression Tester STD - FB3 - A	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a fabric' s ...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...