Thermal - Cold Cycle Testing Machine

The Thermal-Cold Cycle Testing Machine is a professional equipment used for high and low-temperature reliability testing. It is primarily used in fields such as electronics, electrical engineering, automotive, and aerospace, to test the performance of materials and components under extreme temperature conditions. It conforms to GB/T2423.1.2.3 standards and supports three test modes: high temperature, low temperature, and thermal shock. Rapid temperature switching can be achieved through a two-chamber or three-chamber structure.

Applications

1. Electronics and Electrical Engineering: Testing the temperature stability of chips, batteries, etc., to meet industry standards;

2. Automotive Industry: Verifying the temperature resistance of automotive electronics and body materials;

3. Materials Science: Screening the temperature tolerance of plastics and composite materials to support material selection;

4. Aerospace/Defense Industry: Adapting to extreme temperature change scenarios to ensure stable equipment operation;

5. Medical/Construction Materials: Verifying the temperature durability of medical equipment and building materials to meet compliance requirements.

Standards

BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber).

Adaptive Certification: Configurable to meet ISO, ASTM, and EN standards upon request.

Features

Dual Models for Diverse Needs:

1769 Series (Pressurized): Operates up to114°Cwith integrated pressure chamber for BS 7291 compliance.

1770 Series (Non-Pressurized): Cost-efficient solution for tests up to95°C.

Smart Sample Management:

Adjustable tension rig with load cell (0–500N) for real-time strain monitoring.

Perforated wall panels and custom fixtures for irregularly shaped specimens.

Safety & Efficiency:

Dual-access doors (single/double-hinged) for ergonomic loading.

Self-cleaning water circuit minimizes maintenance downtime.

Connected Workflow:

IoT-ready controller with 7-day auto-sequencing and cloud data backup.

Multi-language HMI (English, French, German, Chinese) with audit trail logging.

Technical Parameters

Specification	1769 Series (Pressurized)	1770 Series (Non-Pressurized)
Temperature Range	-20°C to 114°C	-20°C to 95°C
Max. Test Pressure	16 bar (232 psi)	N/A
Flow Rate	25 m³/h (108 GPM)	25 m³/h (108 GPM)
Max. Sample Ø	160 mm	160 mm
Power Supply	380V/50Hz 3-phase (CE certified)	220V/60Hz single-phase (UL listed)
Chamber Volume	850L (expandable to 1.200L)	600L
Dimensions (W×D×H)	1.200mm × 800mm × 1.900mm	900mm × 700mm × 1.700mm
Weight	680 kg (net)	520 kg (net)

Accessoriess

1.Chamber Access:

Single-hinged door (standard) or dual-swing doors for walk-in loading.

2.Sample Fixation:

Adjustable racks for pipes/fittings (Ø16mm–Ø160mm).

Custom perforated walls for bundled specimens.

3.Tension Control:

Motorized tension rig with 0.1N resolution load cell.

4.Extended Warranty:

3-year comprehensive coverage for critical components.

5.Calibration Kit:

NIST-traceable temperature/pressure sensors with certificate.

Test Procedures

1. Pre-test Preparation

Check that the instrument's power supply and cooling/heating systems are functioning correctly, replenish the circulating medium, clean any impurities from the test chamber, and calibrate the temperature sensor.

2. Sample Preparation and Installation

Cut the sample according to testing requirements, record the sample's basic information, place the sample smoothly into the test chamber, avoiding stacking, and ensure the sample does not touch the chamber walls.

3. Parameter Settings

Select the test mode via the control panel, set the high and low temperature thresholds, constant temperature duration, number of cycles, and heating/cooling rate. Save the parameters after confirming their accuracy.

4. Starting the Test

Close the test chamber door, press the start button, and the instrument will automatically run according to the set parameters, monitoring the panel temperature and operating status in real time.

5. Test Monitoring

During operation, observe the instrument for any abnormalities, record changes in the sample's state during the temperature cycling process, and prevent sudden malfunctions from affecting the test.

6. Test Completion and Cleaning

After reaching the set number of cycles, the instrument will automatically shut down. After the chamber temperature returns to room temperature, open the chamber door, remove the sample and record the test results, clean the test chamber, turn off the instrument power, and organize the test data.

Другие товары поставщика

	Constant Temperature and Humidity Test Chamber	Features and Benefits 1. Precise Control Advanced system with ±0.1°C temperature accuracy and ±2.5%RH humidity accuracy. Nichro...
	Plastic ball indentation hardness tester	Meet the standard: JTG E50 T1143-2006.SL/T.JT/T 521- Appendix A-2004.JTS-206-1- Appendix B B.3-2009 JTS/T245-2023.etc. Instrument features: Cus...
	Zipper Fatigue Tester	Product Introduction: The functional life of a zipper is often determined by its ability to withstand numerous opening and closing cycles without ...
	Helmet Surface Friction Testing Machine	Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi...
	Bending Tester STD- FB2 - A	The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artisans and professionals when judging a fabric's texture. T...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...