Single Burning Item，test apparatus， BS EN 13823

Introduction

Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions. Samples were placed inside the sliding flame (methane combustion sandbox boxes), under the exhaust pipe. Sample combustion reaction condition to accept dual monitor machine and visually. Heat and smoke release rate assessment instruments detect objects by observing performance.

The sample is placed on a movable cart located under the exhaust system, and the combustion reaction of the sample can be automatically displayed and visible. By calculating the heat release rate (HRR), smoke release rate (SRR) to evaluate the combustion characteristics of the material, and other physical properties evaluated by visual observation. SBI measurement range, the fire growth rate index (FIGRA) is the most representative measure factors; in addition, there are factors measuring oxygen consumption representative, CO/CO2 generation amount, smoke growth rate index (SMOGRA) and so on. Maximum heat release rate can reach 1MW.

Standards

• BS EN 13823: A single burning instrument (SBI) Determination of building materials in the single burning heat invasion status

Structure

1. Ergonomics design for structural design and control system.;

2. the test system has a combustion chamber, a small cart, exhaust pipes, gas supply systems, control systems and data processing system;

3. Combustion chamber dimensions: 3m X 3m X 2.4 m, Chamber wall is made ofheat resistantcalcium silicate plate andsteeless.

Ignition System

• 10kV spark ignition, a cease-fire system for safety. Ignition automatically is positioned by a mechanism fixture.

• Import mass flowmetercontrolthe gas flow.

•Systemhasflamealarm device for safe and reliable.

Gas sampling system

• Include particulate filter, cold traps, suction pump, drying cylinder, flow controllers

Measurement System

• Imported paramagnetic oxygen analyzer,o2measurement range of 0-25%, linearity deviation <1%.

• Imported Infrared CO2 analyzer co2; measuring range: 0-2 / 10%, linearity deviation: <± 1%.

• Measurement of smoke density with the laser system.

Computer Control System

• Computer Labview control system to Control parameter setting and display; test status and fault display, query.

• The data acquisition and preservation; picture monitoring, real-time temperature curve, real-time CO2 / O2 data curve display; the historical trend and data query;

• Data USB export. Historical curve and data query, print;

• Sound alarm and alarm display functions accidents.

• ControlhaveUSB / RS232 serial port on the box, you can add adesktop / laptopoperating control.

• Programmable Logic Controller (PLC) control system:

Automatic ignition, ignition failure detectionandprotection.

Propane gas flow automatic control and display.

PLC + inverter implement automatic control and exhaust gas flow rate display.

Automatic measurement and calculation of combustion of materials: heat release rate (HRR), smoke growth index (SPR), oxygen consumption (O2), CO2 generation amount.

Technical Parameters

1. System temperature measurement range: 0-400°C; Measurement accuracy: ≤±0.5°C;

2. System differential pressure measurement range: 0-100 Pa (max); Measurement accuracy: ≤±2 Pa;

3. Exhaust flow measurement range: 0.25 m³/s-0.8 m³/s (max); Measurement accuracy: ≤±1.5%;

4. Gas flow control accuracy: <647 mg ± 10 mg

5. Oxygen analysis (paramagnetic type) range: 16%-21%, response time <12 seconds;

6. Carbon dioxide (IR type) concentration measurement range: 0%-10%, linearity greater than 1% of full scale;

8. Optical density measurement: Measurement range: 0%-99.9%; Measurement accuracy: No more than ±5% of the filter reading;

9. Relative humidity measurement: Measurement range: 20%-80%, Accuracy: ≤±5%;

10. Fuel Commercial propane gas, purity ≥ 95% (provided by the user);

11. Power supply: AC 380V, 6 kW;

12. Equipment dimensions (combustion chamber and exhaust duct): 6100 mm × 5500 mm × 4600 mm (length × width × height);

13. Combustion chamber dimensions: 3000 mm × 3000 mm × 2500 mm (length × width × height);

Другие товары поставщика

	High temperature vacum friction & wear tester	The working principle of a high-temperature vacuum friction and wear testing machine is to simulate the friction and wear behavior of materials und...
	Rapid Closed Cup Flash Point Tester	Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM...
	Touch Screen Tap-and-Scratch Durability Tester	Application Primary applications Durability testing of mobile touch screens Repeated tapping life test of capacitive displays Scratch and slid...
	Safety Helmet Flammability Tester，Safety Helmet Flame Resistance Tester	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ea...
	Hot Tack Tester / Heat Seal Tester	The Hot Tack Tester/Heat Seal Tester is specifically designed for testing the heat-adhesion and heat-sealing properties of packaging materials such...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...