Temperature-Humidity-Vibration Combined Test System,Temperature Humidity Combined Vibration Test System

The Temperature-Humidity-Vibration Combined Test Systemis an advanced reliability testing platform that integrates climatic stress with mechanical vibration. By combining a high-performance environmental chamber with an electrodynamic or mechanical shaker, this system allows you to simulate the complex, multi-dimensional stresses that products face in real-world operating environments. It is engineered specifically to identify synergistic failure modes that single-stress tests might miss, making it an indispensable tool for safety screening and durability validation of critical assemblies.

Applications

Aerospace Sector: Evaluates the performance of aircraft components under temperature, humidity, and vibration conditions.

Electronics and Communications Industry: Conducts comprehensive testing on electronic components and communication equipment to assess their reliability in diverse environments.

Materials Science: Assists researchers in investigating changes in the physical and chemical properties of materials under varying environmental conditions, providing data support for new material development.

Automotive Manufacturing: Simulates the environmental conditions automotive components encounter in diverse climates and road conditions to evaluate their durability and reliability.

Standards

GB/T 2423.35‌ Procedures for combined temperature, humidity, and vibration testing, including environmental condition setting and performance monitoring

‌GB/T 28046.3‌ Focuses on automotive electrical and electronic systems, classifying severity by component installation location (e.g., engine, body) to simulate actual operating environments

GB/T 44279-2024 Covers combined temperature-humidity-vibration-low-pressure testing, enhancing simulation capabilities for extreme environments (e.g., high altitude or tropical climates)

IEC 60068-2-53 Test methods for electrical and electronic products under combined temperature, humidity, and vibration environments, emphasizing accelerated exposure of product failure modes through multi-stress superposition

ISO 16750-3 Prescribes coordinated testing of mechanical loads (vibration) and temperature conditions for automotive electronic equipment, ensuring component durability during vehicle operation

Features

1. Simultaneously simulate multiple environmental factors: Capable of concurrently simulating temperature, humidity, and vibration to more closely replicate actual product usage conditions, enhancing test accuracy.

2. Accelerates exposure of potential product defects: Through stress superposition, it expedites the manifestation of latent design flaws, manufacturing imperfections, or premature component failures, providing evidence for design enhancements.

3. Cost savings: Reduces equipment investment and testing space requirements, thereby lowering R&D and testing expenses.

Parameters

Item	Specification
Temperature Range	-60°C ~ +150°C
Temperature Change Rate	≥5°C/min (with load), average over the range of -40°C to 100°C
Temperature Deviation	≤±2°C (no load, steady state)
Temperature Uniformity	≤2°C (no load, steady state)
Temperature Fluctuation	≤±0.5°C (no load, steady state)
Humidity Range	20% R.H. ~ 98% R.H.
Humidity Deviation	+2% R.H. ~ -3% R.H. (when >75% R.H.), ±5% R.H. (when ≤75% R.H.)

Test Procedures

Sample Preparation: Develop test protocols based on product type (e.g., electronic components or metal parts) and record baseline data.

Environmental Simulation: Simultaneously apply temperature (-70°C to 150°C), humidity (10%-98% RH), and vibration stress within the test chamber using a multi-channel closed-loop control system.

Intermediate Inspection: Conduct visual inspections, dimensional measurements, and electrical tests at critical test phases (e.g., temperature peaks), comparing before-and-after data.

Data Analysis: Evaluate specimen responses, identify failure modes (e.g., resonance or material aging), and compile detailed reports.

Accessories

(1) Removable Floor Panels: Customized interface plates to match different shaker head expanders.

(2) Flexible Thermal Bellows: High-temperature silicone or reinforced fabric sleeves to seal the shaker-to-chamber connection.

(3) Multi-Channel Accelerometers: For real-time monitoring of vibration response at different points on the specimen.

(4) Cable Access Ports: Standard 100mm or 150mm ports for power and signal lines to the device under test (DUT).

(5) CCTV Monitoring: High-definition internal camera system to record specimen behavior during high-intensity vibration.

FAQ

Q1: How do you handle condensation on the shaker head expander during low-temperature tests?

A: To prevent icing or moisture damage to the shaker's internal coils, we utilize a specialized "dry air purge" or "thermal barrier" system. This directs a flow of dry, room-temperature air around the shaker head to keep the moisture level below the dew point at the interface.

Q2: Does the vibration of the shaker affect the accuracy of the temperature sensors?

A: High-frequency vibration can cause mechanical resonance in standard probes. We use armored, vibration-resistant PT100 sensors and secure them with specialized damping clips to ensure the readings remain stable and accurate during the most intense test phases.

Q3: Can this system be used for "Battery Thermal Runaway" testing?

A: While it can simulate the environments that lead to thermal runaway, testing an actual runaway event requires additional safety features like explosion-proof vents, fire suppression (CO2 or Argon), and reinforced wall structures. Please consult us for an "Ex-rated" configuration if this is your intended use.

Q4: What is the maximum weight the system can handle during a combined test?

A: This depends on the force rating of your shaker, not just the chamber volume. When calculating load, you must include the weight of the specimen plus the weight of the "fixture" and "head expander." We can help you calculate the "Available G-level" based on your specific DUT mass.

Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.

Другие товары поставщика

	Battery Isothermal Calorimeter	Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ...
	Thrust Bearing Rolling Friction and Wear Testing Machine	Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro...
	Femoral Stem Neck Prostheses Fatigue Tester	Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def...
	Flame retardant cable cover	Product advantages Friction resistan,Flame retard,Corrosion,Dustproof; Application industry: Automobile,Grinding process,Electroplating,Chemical...
	Flame retardant paper and board burning tester	Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...