Photovoltaic Ammonia Test Chamber

• 

Applications

The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluate the corrosion resistance of photovoltaic modules in ammonia environments, ensuring their long-term stable operation in harsh conditions such as industrial or agricultural settings.

Standards

IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testing (The core standard for this equipment).

IEC 61701: Salt mist corrosion testing of photovoltaic (PV) modules.

IEC 60068-2-52: Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution).

GB/T 2423.17 / GB/T 2423.18: Environmental testing for electric and electronic products—Salt mist testing methods.

IEC Draft 82/722/CDV: Specific requirements for integrated salt mist and ammonia gas exposure sequences.

Features

This equipment can independently perform all test procedures required by IEC 61701 and IEC Draft Standard 82/722/CDV. Specifically, spray testing at severity levels 1-6. damp heat storage, standard atmospheric environment testing, and sample cleaning phases are all completed within the NaCl corrosion chamber. Ammonia spray testing, damp heat storage, spray washing, and drying can all be performed within the NH3 corrosion chamber.

Parameters

Accessories

1.Ammonia Gas Dosing System: Precision mass flow controllers for accurate gas injection.

2.Ammonia Concentration Sensor: High-precision electrochemical or laser-based gas detectors.

3.Specimen Racks: Non-reactive, adjustable holders designed to support full-sized PV modules at standard angles.

4.Exhaust Scrubber Unit: A chemical neutralization system to safely treat ammonia-laden air.

5.NaCl Spray Module: Integrated nozzles and reservoir for salt mist phases (Standard Severity 1-6).

6.Deionized Water Rinse: Internal spray bars for automated sample cleaning between test stages.

Test Procedures

1.‌Preparation‌

‌Sample Preparation‌: Clean samples and secure them on the sample rack, ensuring they do not touch each other.

‌Solution Preparation‌: Prepare a 5% NaCl solution (pH 6.5-7.2) according to the standard.

2.‌Power-On Test

‌Power Connection‌: Connect the power supply and turn on the main switch.

3. Test Operation

Start Test: After confirming parameters are correct, press the “Start” button.

Spray Inspection: Once temperature is reached, the spray system will automatically activate. Observe spray uniformity.

4. Test Completion

Shutdown Procedure: Turn off the spray switch. Allow cooling to below 40°C before disconnecting power.

Sample Removal: Remove specimens for corrosion assessment.

Другие товары поставщика

	Multi-Function Thermal Conductivity Measurement Platform	Multi-Function Thermal Conductivity Measurement Platform is an absolute-method measurement system designed for accurate determination of thermal co...
	Elastic Tape Fatigue Testing Machine	This instrument is used to test the elasticity of elastic belt after reciprocating movement. Application Elastic Tape Fatigue Testing Machineis u...
	Vacuum Ball - Disk Friction Tester	A vacuum ball-on-disk friction tester is a device used to simulate friction and wear behavior under actual operating conditions, in order to evalua...
	Sauce Packet Pressure Testing Instrument	The pressure resistance tester for sauce packets is a device specifically designed to test the pressure - resistance performance of soft packaging ...
	Thermal Comfort Environmental Chamber	Application HVAC and Thermal Comfort Research: Study human thermal comfort and conduct experimental teaching in controlled climate environments. ...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...